Step 2: Assemble paper handling options
CAUTION: If you are using a
Preparing the caster base
CAUTION: The correct stabilizer screws must be installed in each optional drawer and the duplex unit to secure the printer and options together.
If you purchased a printer stand, follow the assembly instructions provided with the stand, and then return to Step 2: “Assemble paper handling options” in this book.
The caster base is used when placing your MFP on the floor. It provides mobility and a stable platform for your MFP. There are different assembly instructions for use with a
1Remove all items from the caster base carton.
2Remove and group the machine screws, washers, stabilizer screws, and posts from the hardware bag.
3Determine which screws you need for your configuration and place the other screws into the bag.
•The six long screws (1) are used with three
•The six short screws (2) are used with the
•The two long posts (3) are used with the duplex unit.
•The two short posts (4) are used when a duplex unit is not available.
•The two long machine screws (5) are used with the 2000- sheet drawer.
•The two short machine screws (6) are not used with this scanner.
Depending on your configuration, some of the stabilizer screws and posts will not be used.
4If you have a
Assemble paper handling options
4
