Ingersoll-Rand SSR UP6 50PEI HF50-PE, SSR UP6 40 manual Operating Instructions - Intellisys Option

36 OPERATING INSTRUCTIONS – INTELLISYS OPTION

LEGEND

PORO	Horn, power outage (option)
RAC	Contacts, remote alarm, (option)
1RPS	Switch, high refrigerant pressure (option)
2RPS	Switch, fan pressure (option)
RS1	Switch, remote start (option)
RS2	Switch, remote stop (option)
1SV	Valve. solenoid (load) N.C.
3SV	Valve, solenoid (blowdown) N.O.
5SV	Valve, solenoid (modulation option)
6SV	Valve, solenoid (modulation option)
10SV	Valve, solenoid (line/sump)
	Barrier terminal strip
BLK	Black
BLU	Blue
GRN	Green
RED	Red
WHI	White

NOTES

1.Approved fused disconnect or circuit breaker per N.E.C. requirements must be provided by customer.

2.Dashed lines represent wiring by customer.

3.Sizing of electrical components not supplied by Ingersoll Rand is the responsibility of the customer and should be done in accordance with the information on the compressor data plate N.E.C. and local electrical codes.

4..When changing the supply voltage, ensure that:

a)The motor and the transformer are rewired for the new voltage

b)The motor overload is adjusted to the proper setting.

5.Blue wire – 16volts A.C.

6.Verify actual motor connections with motor schematic.

SSR UP6 40, SSR UP6 50PE, SSR UP6 50PEI, HF50–PE,	http://air.ingersollrand.com
EP50–PE, HP50–PE, HXP50–PE