Connecting to a Desk Phone without a Headset Port

If your desk phone does not include any built-in support for adding a headset, then connect the Jabra GO base between the handset and the desk-phone body as described below.

Figure 9: Connecting to a desk phone without a headset port

1.On your desk phone, unplug the handset cable from the phone body at the phone-body side.

2.Plug the loose end of your handset cord to the port marked on the Jabra GO base.

3.Connect the telephone cord included with your headset from the port marked on the Jabra GO base to the handset port on your desk phone body.

4.Your base and desk phone are now connected. Note, however, that you must still configure the base for your

specific desk-phone model using the desk phone setup wizard. See the section “Configuring the Jabra GO Base for your Desk Phone”.

Jabra GO 6470 User manual

18

Page 18
Image 18
Jabra GO 6470 Connecting to a Desk Phone without a Headset Port, Connecting to a desk phone without a headset port