4.Your phone now looks to see if any nearby Bluetooth® wireless technology devices are advertising themselves for pairing. Use your phone’s controls to identify and select the Jabra GO 6400 device. Your phone may also ask for the headset’s pass code. The pass code for all Jabra devices is 0000 (four zeros).
Jabra GO
5.Your phone attempts to connect to the headset and then shows you the result of the attempt. If the attempt fails, please try again. If you are still having trouble, please check your mobile phone documentation and/or contact technical support for Jabra and/or your mobile phone.
Note:
-All communications between your Jabra GO headset and mobile phone are encrypted, so others will not be able to intercept and understand your conversation. Establishing this encryption is an important part of the pairing process.
-Just because two devices are paired, does not necessarily mean they are connected (which means that the link between them is active). Typically, connection occurs automatically once your mobile phone is paired but you might need to connect manually using the menu system on your mobile phone (as described in your phone’s documentation).
Pairing the Headset with a Jabra GO Base
If you dock a Jabra GO base and headset that are not paired, the touchscreen asks if you would like to pair the two units (thereby removing any previously paired headset from the base’s pairing table). Touch the confirm icon to pair them; touch the cancel icon to prevent pairing (while still charging the headset).
No pairing notification is shown if you dock a headset to a Jabra GO base with which it is already paired.
Pairing the Headset with a Jabra LINK 350 USB Bluetooth® Adapter
To pair the headset to a Jabra LINK 350 USB Bluetooth® Adapter connected to your computer, place both units in pairing mode while they are close to each other. They will find each other automatically and then pair and connect to each other as needed. See Section 10.4: Pairing the Adapter and Headset for complete details.
Managing Your Bluetooth® Connections
Usually, the base and headset manage their Bluetooth® connections automatically, even as you take the mobile phone out of range and/or turn off the devices from time to time. However, Jabra GO does provide controls for managing the connection manually if necessary, as described below.
Jabra GO 6470 User manual
40
