Jabra GO 6470 user manual Connecting to the GN1000 Remote Handset Lifter

Connecting to the GN1000 Remote Handset Lifter

A remote handset lifter gives you remote call control with a Jabra GO headset up to 100 m away from your desk. It lets you answer calls, end calls and transfer ring tones to the headset.

The GN1000 Remote Handset Lifter is an accessory available from Jabra. It is a motorized device that physically lifts the handset when you use controls of your Jabra GO base or headset. You can use the handset lifter with nearly any type of desk phone — including phones that also happen to have electronic-hookswitch support.

Figure 16: Connecting to a GN1000 Remote Handset Lifter

To connect the Jabra GO base to a GN1000 RHL handset lifter, follow the instructions in the desk phone setup wizard, as given below:

SELECT	1. When you	CONNECT	2. In the first
	reach the		CONNECT
Electronic hookswitch	touchscreen	Unplug handset cable	screen, shown
	shown left,		left, unplug
adapter
	select Jabra		handset cable.
	GN1000:
Jabra GN1000

Figure 17: Select Jabra GN1000		Figure 18: Unplug handset cable
CONNECT TO BASE	3. In the (first)	CONNECT TO BASE	4. In the (second)
	CONNECT TO		CONNECT TO
	BASE screen,		BASE screen,
	shown left,		shown left, con-
	connect the		nect the cable
	handset as		with the blue
	shown.		marking to the
			base port, as
			indicated in the
			wizard.

Figure 19: Connect as shown here Figure 20: Connect as shown here

Jabra GO 6470 User manual

23