Note: If you dock a Jabra GO base and headset that are not paired, the touchscreen asks if you would like to pair the two units removing the previously paired headset (if any) from the base’s pairing table).
4.4Connecting the Jabra GO Base to Your Desk Phone
Identifying Your Desk Phone Features
The way you connect and configure the Jabra GO base will vary according to the type of desk phone you are using. Check your phone (by looking at its connectors and/or documentation) to see which of the following features it has, then see the appropriate section below to learn how to connect your base to the phone:
-Standard desk phone
This type of phone does not include any
-Desk phone with headset port
This type of phone provides a dedicated headset port (usually at the back of the phone). These phones typically also have a button on the front panel for switching between the headset and handset. This type of phone might also have an electronic hookswitch (see below).
-Desk phone with electronic hookswitch
This type of phone is able to place or answer a call automatically when you press the multifunction button on your headset. This requires a desk phone that includes an electronic hookswitch feature and also requires an extra adapter cable from Jabra. Please see our web site and/or refer to your telephone’s user manual for details about electronic hookswitch compatibility.
-Desk phone with GN1000 Remote Handset Lifter
A handset lifter physically lifts your handset from your desk phone when needed, thereby creating a solution that works similarly to an electronic hookswitch. The GN1000 Remote Handset Lifter is available separately; please speak to your Jabra dealer for details.
Jabra GO 6470 User manual
17
