all other parts
●Wash in warm soapy water, then dry.
●For storage, stack the baskets one inside the other, starting with the highest numbered basket and finishing with basket number 1 .
●Push excess cord into the back of the steamer.
descaling
●The appliance should be
1Fill the water tank with 200ml of household appliance descaler, then fill the water tank up to the MAX level with water (approximately 800ml).
2Fit the drip tray, one basket and the lid.
3Plug in the appliance, switch on and allow the steamer to operate for 5 minutes.
4Switch off and unplug the appliance and allow to stand overnight.
5Empty and discard the descaling liquid.
6Rinse out the water tank several times with fresh warm water.
7Wash the drip tray, basket and lid in warm soapy water, then dry.
8Refill the water tank with fresh water, refit the parts and allow to run for 5 minutes. Empty and discard any remaining water.
9Rinse the water tank several times with fresh warm water.
10 Wash the drip tray, basket and lid in warm soapy water.
11 The appliance is now ready for use.
service and customer care
●If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
If you need help with:
●using your steamer
●servicing or repairs
Contact the shop where you bought your steamer.
4
