KitchenAid YKERC500 Using Convect Full Meal, Place food in cold oven, Set Convect Full Meal cycle

U sing and Caring for Your Oven

Using Convect Full Meal

(Thermal-Convection™ models)

Convect Full Meal lets you choose from among ten preset oven cooking cycles. These cycles store commonly used cooking times, cooking temperatures, and probe temperature settings. Convect Full Meal saves you time by limiting the number of pads you have to press when cooking at a favorite setting.

1. Place food in cold oven.

If you need the Temperature Probe for your cycle (settings 5-8), insert probe into food. (Follow Steps 1-4 in the “Using the temperature probe” section.)

2. Set CONVECT FULL MEAL cycle.

PRESS CONVECT

FULL

MEAL

Press desired Number pad.

Example:

PRESS 1

(Use the “Convect Full Meal chart” as your guide for selecting the correct cycle.)

NOTES:

•You can change the Convect Full Meal cycle any time before pressing START/ ENTER by repeating Step 2.

YOU SEE

DELAY	TIMED	ON
CLEAN	LOCKED
DEHYD	ROTIS	HR MIN	MIN SEC
START?		CLEAN START STOP TIMER

Example:

YOU SEE

DELAY	TIMED	ON
CLEAN	LOCKED
DEHYD	ROTIS	HR MIN	MIN SEC
START?		CLEAN START STOP TIMER

•The cooking setting, time, or probe temperature will be displayed before you press START/ENTER.

3. Start oven.

PRESS START

ENTER

NOTE: Cycles 1-4, 9, 0: To see the time when the CONVECT FULL MEAL cycle will end, press STOP TIME.

When the Convect Full Meal cycle is done, “End” and the time of day will show in the display. Four tones will sound, followed by one short tone every minute, until you open the door, remove the probe, or press CANCEL/OFF.

Example

For Auto

Set 5:

YOU SEE

DELAY	TIMED	ON
CLEAN	LOCKED
		HR MIN	MIN SEC
DEHYD	ROTIS
START?		CLEAN START STOP TIMER

Example:

YOU SEE

DELAY	TIMED	ON
CLEAN	LOCKED
DEHYD	ROTIS	HR MIN	MIN SEC
START?		CLEAN START STOP TIMER

34