HOME
Chapter 5 Printer EKC
You must enter the same password (8 digits or less) in the User ID text box that you set up on the copier for Printer EKC.
If you do not enter the correct password or if you leave the User ID text box blank, the print job is not performed and is registered as non complete job. When in doubt about the password for Printer EKC, ask your system administrator.
3. Click [OK] to close the Properties and start the printing process.
●EKC Limit
If you exceed the limit previously set in the Printer EKC, the following will occur, depending on the settings of the Printer EKC.
When in doubt about the Printer EKC settings, ask your system administrator.
When a print job is transmitted after reaching a limit:
•A message will appear indicating that the EKC counter reached a preset limit, but the printing pro- cess is completed normally and the EKC counter increments as if nothing happened.
•No output is produced and the job is registered on the non complete job list.
If the EKC counter hits a preset limit in the process of getting an output:
•A message will appear indicating that the EKC counter reached a preset limit, but the printing pro- cess is completed normally and the EKC counter increments as if nothing happened.
•After the current print job is completed, no additional jobs are accepted. If you try to transmit the next print job, it is deleted and registered on the non complete job list.
•The print job instantly stops, causing the already fed paper to be output. The job is registered on the non complete job list.
A print job deleted by the Printer EKC feature is registered on the non complete job list. For infor- mation on checking the No complete job list screen, refer to "Troubleshooting".
(p.Appendix
