Konica Minolta IP-511 manual M E, Printer Driver Functions Function List

H O M E

Chapter 3 Printer Driver Functions

●Function List

The following list summarizes functions (Setting Items) which can be set by using the printer driver of the printing system.

Some of the interfaces to tabs and others are displayed differently by OSs.

Also, among the tabs there are some that are not shown depending on settings.

Refer to "Description of Functions" for details of each function (Setting Items).

(p.3-13)

In addition, refer to "Chapter 4 Control Panel Setup" for how to perform printer settings from the LCD touch screen.

(p.4-1)

Classification	Setting Items	Set Value	Description	95/98/	NT4.0/
				Me	2000
Paper tab	Copies	1 to 9999	This function is used to specify	o	o
			the number of copies to be
			printed.
	Collate	On / Off	This function is used to specify	o	o
			how to output multiple pages.
	Orientation	Portrait	This function is used to specify	o	o
		Landscape	orientation.
	Paper size	5.5" x 8.5"	The paper sizes you can set	o	o
		8.5" x 11"	differ depending on
		8.5" x 14"	specifications in the country and
		11" x 17"	trays. Refer to the operating
		A3 - 297 x 420 mm	manual of the copier for details.
		A4 - 210 x 297 mm
		A5 - 148 x 210 mm
		A6 - 105 x 148 mm
		B4 - 250 x 354 mm
		B5 - 182 x 257 mm
		B6 - 128 x 182 mm
		F4 - 8.0 x 13 inches
		8K - 267 x 390 mm
		16K - 195 x 267 mm
		5.5" x 8.5" W
		8.5" x 11" W
		11" x 17" W
		A3W- 297 x 420 mm
		A4W - 210 x 297 mm
		A5W - 148 x 210 mm
		B4W - 250 x 354 mm
		B5W - 182 x 257 mm
	Media Type	Plain paper	This function is used to specify	o	o
		Thin paper	the paper type to be printed
		Thick paper	from the Bypass tray.
		Tab sheet
		2nd Original
		OHP [Transparency]
		OHP-Interleave
		[Blank]
		OHP-Interleave [Print]
		User defined type
	Paper Source	Auto Select	This function is used to specify	o	o
		Bypass tray	the paper tray.
		Tray 1
		Tray 2
		Tray 3
		Tray 4(LCT)

3-7