Binary to Hex
9.1 Connect Mode Options
Note: Character response codes are C=conn, D=disconn, N=unreachable
Table 36 - Connect Mode Options
Accept | Serial | Active Connection | Hostlist | Hex |
Incoming | Response | Startup |
|
|
Connections | Upon |
|
|
|
| Connection |
|
|
|
Never | None (quiet) | No active startup |
| N/A |
Never | None (quiet) | Any character |
| 1 |
Never | None (quiet) | Active DTR |
| 2 |
Never | None (quiet) | CR (0x0D) |
| 3 |
Never | None (quiet) | Manual connection |
| 4 |
Never | None (quiet) | Autostart |
| 5 |
Never | None (quiet) | UDP |
| C |
Never | Character | No active startup |
| 10 |
Never | Character | Any character |
| 11 |
Never | Character | Active DTR |
| 12 |
Never | Character | CR (0x0D) |
| 13 |
Never | Character | Manual connection |
| 14 |
Never | Character | Autostart |
| 15 |
Never | Character | UDP |
| 1C |
With DTR | None (quiet) | No active startup |
| 40 |
With DTR | None (quiet) | Any character |
| 41 |
With DTR | None (quiet) | Active DTR |
| 42 |
With DTR | None (quiet) | CR (0x0D) |
| 43 |
With DTR | None (quiet) | Manual connection |
| 44 |
With DTR | None (quiet) | Autostart |
| 45 |
With DTR | None (quiet) | UDP |
| 4C |
With DTR | Character | No active startup |
| 50 |
With DTR | Character | Any character |
| 51 |
With DTR | Character | Active DTR |
| 52 |
With DTR | Character | CR (0x0D) |
| 53 |
With DTR | Character | Manual connection |
| 54 |
With DTR | Character | Autostart |
| 55 |
With DTR | Character | UDP |
| N/A |
Unconditionally | None (quiet) | No active startup |
| C0 |
Unconditionally | None (quiet) | Any character |
| C1 |
Unconditionally | None (quiet) | Active DTR |
| C2 |
Unconditionally | None (quiet) | CR (0x0D) |
| C3 |
Unconditionally | None (quiet) | Manual connection |
| C4 |
Unconditionally | None (quiet) | Autostart |
| C5 |
Unconditionally | None (quiet) | UDP |
| CC |
Unconditionally | Character | No active startup |
| D0 |
