Configure
3.6.3 Flow
Flow control sets the local handshake method for stopping serial input/output.
Table 8 - Flow Control Options
Flow Control Option | Hex |
No flow control | 00 |
XON/XOFF flow control | 01 |
Hardware handshake with RTS/CTS lines | 02 |
XON/XOFF pass characters to host | 05 |
3.6.4 Port Number
The setting represents the source port number in TCP connections, and is the number used to identify the channel for remote initiating connections. Default setting for Port 1 is 10001. Range:
Port Numbers |
|
| Reserved for |
|
|
|
|
|
|
1 – 1024 |
|
| Reserved (well known ports) |
|
9999 |
| Telnet setup |
| |
| Reserved |
| ||
30718 |
| Reserved (77FEh) |
| |
|
| Recommended ports, should be used for DeviceComm |
| |
|
| Manager |
| |
|
|
|
| |
The port number functions as the TCP/UDP source port number for outgoing packets. Packets sent to the unit with this port number are received to this channel. The port number selected is the Incoming TCP/UDP port and Outgoing TCP/UDP source port. Port 0 is used when you want the outgoing source port to change with each connection.
