Lantronix 10 manual Channel Parameters

UDP

8.3.1 Channel Parameters

Use the following table to select setup record parameters for Channels 1:

Table 22 - Channel Parameters

Byte(s)	Function
(Channel 1)
16	Interface Mode (see Table 23 - Interface Mode Options)
17	Line Speed
	Bits 7-5: Reserved
	Bits 4-0: Baud Rate (see Table 25 - Baud Rate Settings)
18	Flow Control (see Table 26 - Flow Control Options)
19	Reserved
20-21	Own TCP port low-byte, high-byte (Intel)
22-23	Remote TCP port low byte, high-byte (Intel)
24-27	Remote IP address (low/high low/high)
28	Connect Mode (see Table 27 - Connect Mode Options)
29	Disconnect Mode (see Table 28 - Disconnect Mode Options)
30	Disconnect w/ inactivity time-out, minutes (00 if unused)
31	Disconnect w/ inactivity time-out, seconds (00 if unused)
32-33	Characters to trigger send immediately (sendchar)
34	Flush mode (see Table 29 - Flush Mode Options)
35	Pack Control (see Table 30 - Pack Control Options)
36-47	Reserved (0)
48-63	a) Terminal name for Telnet terminal type option (15 characters max),
	0-terminated. If set and Bit 6 in Disconnect Mode is set, Telnet
	connection will be assumed.
	b) Password for Passworded Socket Connection (Bit 4 in Disconnect
	Mode Set).

8-8 UDS-10 User Guide