Lantronix 10 manual Common I/F Mode Setting Binary Hex

Configure

The following table demonstrates how to build some common Interface Mode settings:

Table 7 - Common Interface Mode Settings

Common I/F Mode Setting		Binary	Hex
RS-232C,	8-bit, No Parity, 1 stop bit (1)	0100 1100	4C
RS-232C,	7-bit, Even Parity, 1 stop bit (1)	0111 1000	78
RS-485 2-Wire, 8-bit, No Parity, 1 stop bit (1)		0100 1111	4F
RS-422, 8-bit, Odd Parity, 1 stop bit (1)		0101 1101	5D

(1) The UDS-10 requires you to choose the correct setting in the IF mode.

3-16 UDS-10 User Guide