Lantronix 10 manual Channel 1 Configuration Serial Port Parameters, Baudrate, 2 I/F Interface Mode

Configure

3.6 Channel 1 Configuration (Serial Port Parameters)

Using this option, define how the serial port will respond to network and serial communications.

Baudrate (9600)

I/F Mode (4C)

Flow (00)

Port No (10001)

ConnectMode (C0)

Remote IP Address : (000).(000).(000).(000)

Remote Port (00000)

DisConnMode (00)

FlushMode (00)

DisConnTime (00:00) :

SendChar 1 (00)

SendChar 2 (00)

3.6.1 Baudrate

The unit and attached serial device, such as a modem, must agree on a speed or baud rate to use for the serial connection. Valid baud rates are 300, 600, 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, and 115200 bits per second.

3.6.2 I/F (Interface) Mode

The Interface (I/F) Mode is a bit-coded byte that you enter in hexadecimal notation.

Note: See Table 35 - Binary to Hexadecimal Conversion Table.

Table 6 - Interface Mode Options

I/F Mode Option		7	6	5	4	3	2	1	0
RS-232C (1)								0	0
RS-422/485 (1)								0	1
RS-485 2-wire (1)								1	1
7	Bit					1	0
8	Bit					1	1
No Parity				0	0
Even Parity				1	1
Odd Parity				0	1
1	Stop bit	0	1
2	Stop bit	1	1

(1) The UDS-10 requires you to choose the correct setting in the IF mode.

UDS-10 User Guide 3-15