Lantronix Ethernet manual Web-Manager Configuration, Accessing Web-Manager through a Web Browser

4: Web-Manager Configuration

This chapter describes how to configure the WiBox using Web-Manager, Lantronix’s browser-based configuration tool. The unit’s configuration is stored in nonvolatile memory and is retained without power. The unit performs a reset after the configuration is changed and stored.

Accessing Web-Manager through a Web Browser

1.Open a standard web browser (Netscape Navigator 6.x and above, or Internet Explorer 5.5. and later).

2.In the address bar, enter the WiBox IP address or host DHCP name as listed below:

a)http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP address assigned to the WiBox unit).

b)http://my_WiBox (where “my_WiBox” is the name assigned to the WiBox unit if DHCP is enabled).

c)Cxxxxxx (where xxxxxxx is the last 6 digits of the unit’s MAC address on DHCP-enabled networks).

3.Press Enter. The Web-Manager for WiBox opens in a browser window.

A user and password dialog box displays. By default, no user and password are configured, so just press OK.

WiBox2100E User Guide 27