Lantronix Ethernet manual Connect Mode Options, Incoming Connection, Response, Active Startup

Setup Mode: Channel Configuration

Note: All bit positions in the table that are blank represent “don’t care” bits for that particular option; they can be set to either a 0 or 1 value.

Table 7-5. Connect Mode Options

Connect Mode Option	7	6	5	4	3	2	1	0
a) Incoming Connection
Never accept incoming	0	0	0
Accept with DTR Active	0	1	0
Always Accept	1	1	0

b) Response

Nothing (quiet)					0
Character response (C=connect,					1
D=disconnect, N=unreachable)
c) Active Startup
No active startup						0	0	0	0
With any character						0	0	0	1
With DTR Active						0	0	1	0
With a specific start character						0	0	1	1
Manual connection						0	1	0	0
Autostart						0	1	0	1
Hostlist	0	0	1		0
d) Datagram Type
Directed UDP						1	1	0	0
e) Modem Mode
No Echo			0	0			1	1
Data Echo & Modem Response			0	1			1	1	1
(Numeric)
Data Echo & Modem Response			0	1			1	1	0
(Verbose)
Modem Response Only (Numeric)			0	0		1	1	1	1
Modem Response Only (Verbose)			0	0		1	1	1	0

WiBox2100E User Guide 53