Setup Mode: Advanced Settings
Ethernet Connection Type
The WiBox allows for the Ethernet speed and duplex to be manually configured. Enter 0 for
4 (100 Mbit/half duplex), or 5 (100 Mbit/full duplex).
Ethernet connection type: (0) ? _
Security Settings
Security settings can only be changed using Setup Mode, through a Telnet or serial connection.
Note: As recommended, set security over the dedicated network or over the serial setup. If the parameters are set over the network (Telnet 9999), someone else could capture these settings.
Caution: Disabling both Telnet Setup and Port 77FE prevents users from accessing the setup menu from the network.
Disable SNMP
For security purposes, disable SNMP (if required) on the WiBox unit. The current setting displays in parentheses.
Disable SNMP (N) ? _
SNMP Community Name
The SNMP Community Name is a required field for NMS to read or write to a device. Enter a string of 1 to 13 characters.
SNMP Community Name (public): _
The default entry is public. The current value displays in parentheses.
Disable Telnet Setup
Note: Disabling both Telnet Setup and Port 77FE prevents users from accessing the setup menu from the network.
This setting defaults to the N (No) option. The Y (Yes) option disables access to Setup Mode by Telnet (port 9999). It only allows access locally via the web pages and the serial port of the unit.
Disable Telnet Setup (N) ? _
Disable TFTP Firmware Upgrade
This setting defaults to the N (No) option. The Y (Yes) option disables TFTP for network firmware upgrades.
Disable TFTP Firmware Update (N) : _
WiBox2100E User Guide | 69 |