Lantronix Ethernet manual Connection Settings TCP, Flush Output Buffer Network to Serial

Web-Manager Configuration

At Time of Disconnect

Select Yes to clear the input buffer when the network connection to or from the device is disconnected. The default setting is No.

Flush Output Buffer (Network to Serial)

With Active Connect	Select Yes to clear the output buffer with a connection that is
	initiated from the device to the network. The default setting is
	No.
With Passive Connect	Select Yes to clear the output buffer with a connection initiated
	from the network to the device. The default setting is No.
At Time of Disconnect	Select Yes to clear the output buffer when the network
	connection to or from the device is disconnected. The default
	setting is No.

3.When you are finished, click the OK button.

4.On the main menu, click Apply Settings.

Connection Settings - TCP

To configure a channel’s TCP settings:

1.From the main menu, click Connection for either Channel 1 or Channel 2 to display the Connection Settings page for the selected channel.

2.In the available fields, enter the following information:

Connect Protocol

Protocol

Select TCP from the pull-down menu.

WiBox2100E User Guide 36