Lantronix Ethernet Automatic IP Address Configuration, Select Obtain IP address automatically

Web-Manager Configuration

Figure 4-2. Network Settings

Automatic IP Address Configuration

To automatically assign an IP address and its network configuration:

1.Click Network from the main menu.

2.Select Obtain IP address automatically.

3.Enter the following (as necessary):

BOOTP	Enable permits the Bootstrap Protocol (BOOTP). The BOOTP
	server assigns the IP address automatically from a pool of
	addresses.
DHCP	Enable permits Dynamic Host Configuration Protocol (DHCP).
	DHCP to assign a leased IP address to the WiBox unit
	automatically.
Auto-IP	Enable permits the WiBox to generate an IP in the
	169.254.x.x address range with a Class B subnet.
DHCP Host Name	Enter the name of the host on the network providing the IP
	address.

Note: Consult the System or Network Administrator before adjusting these settings. Disabling all three methods is not advised as the only available IP assignment method will then be ARP or serial port.

4. Click the OK button when finished.

WiBox2100E User Guide 29