Setup Mode: Advanced Settings
Default Settings
Select 7 Default Settings from the Change Setup menu to reset the unit’s Channel 1 configuration, Channel 2 configuration, Security, and Expert settings to the factory default settings.
The server configuration settings for IP address, gateway IP address, netmask, and WLAN remain unchanged.
Defaults for all settings are listed below.
Channel 1 Configuration
Baudrate | 9600 |
|
|
I/F Mode | 4C (1 stop bit, no parity, 8 bit, |
|
|
Port No | 10001 |
|
|
Connect Mode | C0 (always accept incoming connection; no active |
| connection startup) |
|
|
Hostlist Retry Counter | 3 |
|
|
Hostlist Retry Timeout | 250 (msec) |
|
|
Send Character | 0x0D (CR) |
|
|
All other parameters | 0 |
|
|
Channel 2 Configuration
Baudrate | 9600 |
|
|
I/F Mode | 4C (1 stop bit, no parity, 8 bit, |
|
|
Port No | 10002 |
|
|
Connect Mode | C0 (always accept incoming connection; no active |
| connection startup) |
|
|
Hostlist Retry Counter | 3 |
|
|
Hostlist Retry Timeout | 250 (msec) |
|
|
Send Character | 0x0D (CR) |
|
|
All other parameters | 0 |
|
|
WLAN Settings
Enable WLAN | Y (Yes) |
|
|
Topology | 1 (AdHoc) |
|
|
Network Name | LTRX_IBSS |
|
|
WiBox2100E User Guide | 72 |
