Lantronix Ethernet manual WEP Options, WPA Options, Advanced Settings

		Web-Manager Configuration
WEP Options
	Authentication	Select an authentication scheme (Open/None or Shared)
		from the drop down menu.
	Encryption	Select the encryption type (64 bits or 128 bits for WEP) from
		the pull-down menu. 64 bits is the default encryption for WEP.
	Key Type	Select the key type (Hex or Passphrase).
	Key	Enter the Encryption Key in hexadecimal value if Hex is
		selected as the key type. Enter the key as a string if
		Passphrase is selected as the key type. Passphrase input is
		not the same as ASCII input.
		A passphrase of more than 20 characters is recommended.
		Spaces and punctuation characters are permitted.
WPA Options
	Authentication	Select Pre-Shared Keys from the drop down menu.
	Encryption	Select the encryption type from the pull-down menu. TKIP is
		the default encryption for WPA.
	Key Type	Select the key type (Hex or Passphrase).
	Key	Enter the Encryption Key in hexadecimal value if Hex is
		selected as the key type. Enter the key as a string if
		Passphrase is selected as the key type. Passphrase input is
		not the same as ASCII input.
		A passphrase of more than 20 characters is recommended.
		Spaces and punctuation characters are permitted.
Advanced Settings
	Data Rate	WiBox permits the control of the transmission data rate. Click
		the Auto check box to allow the WiBox to automatically set
		the data rate (or leave unchecked to set the transmission rate
		manually). The default rate is 11 Mbps.
		If the Auto check box is selected, choose the maximum data
		rate from the drop down menu.
		If the Auto check box is not selected, select the fixed data
		rate (in Mbps) from the drop down menu.
		Note: Te maximum data rate cannot be selected when the
		WiBox automatically sets the data rate. The WiBox supports
		the following additional rates: 18 Mbps, 24 Mbps, 36 Mbps,
		and 54 Mbps.
	Radio Power	Power management reduces the overall power consumption
	Management	of the WiBox unit. Selecting Enable increases the response
		time.

3.When you are finished, click the OK button.

4.On the main menu, click Apply Settings.

WiBox2100E User Guide 43