Manuals / Brands / Computer Equipment / Network Card / Lantronix / Computer Equipment / Network Card

Lantronix Ethernet Send Characters , Telnet Terminal Type , Channel (Port) Password , WLAN Settings

1 92

Download 92 pages, 1.39 Mb

Setup Mode: Channel Configuration

WiBox2100E User Guide 63

DisConnTime (00:00) ?:

To disable the inactivity timeout, enter 00:00. Range is 0 (disabled) to 5999 seconds

(99 minutes, 59 seconds). The default setting is 0.

Send Characters

Enter up to two characters in hexadecimal representation in sendchar.

SendChar 1 (00) ? _

SendChar 2 (00) ? _

If the unit receives a character on the serial line that matches one of these

characters, it sends the character immediately, along with any awaiting characters, to

the TCP connection. This action minimizes the response time for specific protocol

characters on the serial line (for example, ETX, EOT). Setting the first sendchar to 00

disables the recognition of the characters. Alternatively, the unit can interpret two

characters as a sequence (see Pack Control on page 61). The default setting is 00.

Telnet Terminal Type

This parameter displays only if you enabled the terminal type option in Disconnect

Mode. With this option enabled, you can use the terminal name for the Telnet

terminal type. Enter only one name.

With terminal type option enabled, the unit also reacts to the EOR (end of record) and

binary options, useful for applications like terminal emulation to IBM hosts.

Channel (Port) Password

This parameter displays only if the channel (port) password option is enabled in

Disconnect Mode. With this option enabled, you can set a password on the serial

port. Blank by default.

WLAN Settings

Without adequate protection, a wireless LAN is susceptible to access by

unauthorized users. As such, WiBox features the WPA security standard, based on

IEEE802.11i and IEEE802.1X. WEP is provided for backwards compatibility and

interaction with older devices.

To modify WLAN settings, select 4 WLAN from the Change Setup menu.

Enable WLAN

Enable the Ethernet or the Wireless interface. When WLAN is enabled, the Ethernet

interface is disabled.

Enable WLAN (Y) ? _

Topology

Select Infrastructure (ESS) mode or Adhoc (IBSS) mode. Infrastructure mode

communicates with Access Points. Ad Hoc mode communicates only with other

clients.

Contents

Main WiBox2100E User Guide Copyright and Trademark Contacts Contents Page Page List of Tables List of Figures Page Additional Documentation Page Application Examples Serial Tunneling Network Ad Hoc Network Serial Tunneling Infrastructure Ad Hoc WiBox Connection WiBox with Ethernet Protocol Support Configuration Methods Addresses and Port Numbers Hardware Address IP Address WLAN Settings Port Numbers Serial Connector Pinouts WBX2100E Network Interface Ethernet Connector Pinouts LEDs Introduction WiBox2100E User Guide 18 Technical Specifications Page Installing and Configuring the WiBox Page Page Using Device Installer Viewing the Current Configuration Quick Start WiBox2100E User Guide 25 Page Page Network Configuration Automatic IP Address Configuration Static IP Address Configuration Ethernet Configuration Server Configuration Page Hostlist Configuration Channel 1 and Channel 2 Configuration Serial Settings Page Web-Manager Configuration WiBox2100E User Guide 35 Pack Control Flush Input Buffer (Serial to Network) Connection Settings - TCP Page Web-Manager Configuration WiBox2100E User Guide 38 Endpoint Configuration Common Options Connection Settings - UDP Page WLAN Configuration Page Web-Manager Configuration WiBox2100E User Guide 43 WEP Options WPA Options Advanced Settings Page Page Serial Port Connection Exiting Setup Mode Page Set Gateway IP Address Netmask: Number of Bits for Host Part Note: Class A: 24 bits; Class B: 16 bits; Class C: 8 bits Change Telnet Configuration Password DHCP Name Page I/F (Interface) Mode Flow Port Number Connect Mode Page Page Setup Mode: Channel Configuration WiBox2100E User Guide 55 Command String Result if remote IP is 129.1.2.3 and remote port is 1234 Page d) Datagram Type e) Modem Mode Page Send the Escape Sequence (+++) in Modem Mode Auto Increment Source Port Remote IP Address Remote Port DisConnMode Flush Mode (Buffer Flushing) Pack Control Packing Interval Trailing Characters Send Characters DisConnTime (Inactivity Timeout) Send Characters Telnet Terminal Type Channel (Port) Password WLAN Settings Enable WLAN Network Name (SSID) Adhoc Network Channel Security WEP WPA Fixed or Automatic Data Rate Transmission Data Rate Enable Power Management Page ARP Cache timeout in seconds CPU Performance Disable Monitor Mode at bootup HTTP Port Number MTU Size Security Settings Disable SNMP SNMP Community Name Disable Telnet Setup Disable TFTP Firmware Upgrade Disable Port 77FE (Hex) Disable Web Server Disable Web Setup Disable ECHO Ports Enable Enhanced Password Page Default Settings Channel 1 Configuration Channel 2 Configuration WLAN Settings Setup Mode: Advanced Settings Expert Settings Security Settings Exit Configuration Mode Page Page Page Using TFTP: Command Line Interface Network Upgrade Recovering the Firmware Using the Serial Port and DeviceInstaller To recover firmware: WLAN Country Setting Page Page Page Troubleshooting WiBox2100E User Guide 83 Problem/Message Reason Solution Page Technical Support Page Page Page Regulatory Information USA Federal Communications Commission (FCC) Notice Canada Industry Canada Notice Europe R&TTE Directive 99/5/EC, Wireless Notice Australia & New Zealand Wireless Notice