![](/images/new-backgrounds/1110185/11018575x1.webp)
Web-Manager Configuration
|
| character is received from the serial port. |
|
| With Active Mdm Ctrl In: Accepts external connection |
|
| requests only when the modem_control_in input is asserted. |
|
| With Start Character: Attempts to connect when it receives a |
|
| specific start character from the serial port. The default start |
|
| character is carriage return. |
|
| Manual Connection: Attempts to connect when directed by a |
|
| command string received from the serial port. |
|
| Auto Start: Automatically connects to the remote IP address |
|
| and port after booting up. |
|
|
|
| Start Character | If Active Connect is set to With Start Character, enter the |
|
| start character in this field. The default setting is 0D. |
|
|
|
| Modem Mode | Indicates the |
|
| (if Modem Mode is enabled). The default setting is None. |
|
|
|
Endpoint Configuration |
| |
| Local Port | Enter the local port number. |
|
|
|
| Auto increment local | Select to |
| port number | outgoing connections. The range of |
|
| numbers is 50,000 to 59,999 and loops back to the beginning |
|
| when the maximum range is reached. Disabled by default. |
|
|
|
| Remote Port | Enter the remote port number. |
|
|
|
| Remote Host | Enter the IP address of the remote device. |
|
|
|
Common Options |
| |
| Telnet Mode | This field is available for configuration only when Active |
|
| Connection is not set to None. Select Enable to permit |
|
| Telnet communication to the WiBox unit. |
|
|
|
| Terminal Name | This field is available for configuration only when Telnet Mode |
|
| is Enable. |
|
| Use the terminal name for the Telnet terminal type. Enter only |
|
| one name. When this option is enabled, the unit also reacts to |
|
| the EOR (End Of Record) and binary options, which can be |
|
| used for applications such as terminal emulation to IBM hosts. |
|
|
|
| Connect Response | A single character is transmitted to the serial port when there |
|
| is a change in connection state. The default setting is None. |
|
|
|
| Use Hostlist | If this option is set to True, the device server scrolls through |
|
| the hostlist until it connects to a device listed in the hostlist |
|
| table. Once it connects, the unit stops trying to connect to any |
|
| others. If this connection fails, the unit continues to scroll |
|
| through the table sequentially until it is able to connect to |
|
| another IP in the hostlist. |
|
| The hostlist is disabled for Manual Mode and for Modem |
|
|
|
WiBox2100E User Guide | 38 |