![](/images/new-backgrounds/1110185/11018561x1.webp)
Web-Manager Configuration
Figure 4-3. Server Settings
To configure the WiBox’s device server settings:
1.Click Server from the main menu.
2.Configure or modify the following fields:
Server Configuration
Telnet Password | Enter the password required for Telnet access. |
|
|
Retype Password | |
|
|
Advanced
ARP Cache Timeout | When the unit communicates with another device on the |
| network, it adds an entry into its ARP table. ARP Cache |
| timeout defines the number of seconds |
| refreshes this table. |
|
|
TCP Keepalive | TCP Keepalive time defines how many seconds the unit waits |
| during an inactive connection before checking its status. If the |
| unit does not receive a response, it drops that connection. |
| Enter a value between 1 and 65 seconds. 0 disables |
| keepalive. The default setting is 45. |
|
|
Monitor Mode @ Bootup | Select Disable to disable the entry into the monitor mode via |
| the yyy or xx1 key sequence at startup. This command |
| prevents the unit from entering monitor mode by interpreting |
| the stream of characters that are received during the device |
| server's initialization at startup. |
|
|
WiBox2100E User Guide | 31 |