|
| Setup Mode: Channel Configuration | |
| a) Incoming Connection |
| |
| Never Accept Incoming | Rejects all external connection attempts. | |
|
|
|
|
| Accept with DTR Active | Accepts external connection requests only when the DTR input | |
|
| is asserted. Cannot be used with Modem Mode. | |
|
|
|
|
| Always Accept | Accepts any incoming connection when a connection is not | |
|
| already established. Default setting. | |
|
|
|
|
| b) Response |
|
|
Character Response
A single character is transmitted to the serial port when there is a change in connection state:
C = connected, D = disconnected, N = host unreachable.
Single character mode specifies the character response. The IP address of the host connecting to the unit displays when the unit is in verbose mode. This option is overridden when the Active Start Modem Mode or Active Start Host List is in effect. Default setting is Nothing (quiet).
c) Active Startup
No Active Startup | Does not attempt to initiate a connection under any |
| circumstance. Default setting. |
|
|
With Any Character | Attempts to connect when any character is received from the |
| serial port. |
|
|
With DTR Active | Attempts to connect when the DTR input changes from not |
| asserted to asserted. |
|
|
With a Specific Start | Attempts to connect when it receives a specific start character |
Character | from the serial port. The default start character is carriage return. |
|
|
WiBox2100E User Guide | 54 |
