Lantronix Ethernet manual Quick Start, Required Information, Hardware Address 00-20-4a

3: Quick Start

This chapter describes installation procedures for the WiBox units.

Required Information

Hardware Address

Take note of the unit’s hardware address (also known as MAC address). It is on the product label, in the format: 00-20-4a-XX-XX-XX, where the XXs are unique numbers assigned to the product.

Hardware Address: 00-20-4a-_____-_____-_____

IP Address

The WiBox must have a unique IP address on the network. The systems administrator generally provides the IP address, subnet mask, and gateway.

IP Address:	_______	_______	_______	_______
Subnet Mask:	_______	_______	_______	_______
Gateway:	_______	_______	_______	_______

WLAN Settings

Before the WiBox can communicate on an 802.11b/g wireless network, the WLAN settings must match the wireless network. By default, the WiBox is set to Ad Hoc network mode, and its wireless Network Name (SSID) is LTRX_IBSS.

You can configure either WEP or WPA settings:

Note: WPA Security is only available in infrastructure mode.

WiBox2100E User Guide 19