Lincoln Electric IM892-C Parameter Definition 503 Memory Button Disable, Mode Select Panel Lock

B-31		OPERATION	B-31
		USER DEFINED PARAMETERS
	Parameter	Definition
	P.503	Memory Button Disable
		Disables the specified memory button(s). When a memory is disabled, welding procedures can-
		not be restored from or saved to that memory. If an attempt is made to save or restore a dis-
		abled memory, a message will be displayed on the Mode Select Panel indicating the memory
		number is disabled. In multi-head systems, this parameter disables the same memory buttons
		on both feed heads. This parameter can only be accessed using Weld Manager or Power
		Wave Manager software.
	P.504	Mode Select Panel Lock
		Selects between several Mode Select Panel lockout preferences. When a Mode Select Panel
		selection is locked and an attempt is made to change that parameter, a message will be dis-
		played on the Mode Select Panel indicating the parameter is locked.
		• All MSP Options Unlocked = All adjustable parameters on the Mode Select Panel are
		unlocked.
		• All MSP Options Locked = All knobs and buttons on the Mode Select Panel are locked.
		• Start & End Options Locked = The Start and End parameters on the Mode Select Panel are
		locked, all others are unlocked.
		• Weld Mode Option Locked = The weld mode cannot be changed from the Mode Select Panel,
		all others Mode Select Panel settings are unlocked.
		• Wave Control Options Locked = The Wave Control parameters on the Mode Select Panel are
		locked, all others are unlocked.
		• Start, End, Wave Options Locked = The Start, End and Wave Control parameters on the
		Mode Select Panel are locked, all others are unlocked.
		• Start, End, Mode Options Locked = The Start, End and Weld Mode Select parameters on the
		Mode Select Panel are locked, all others are unlocked.
		This parameter can only be accessed using Power Wave Manager.
	P.505	Setup Menu Lock
		Determines if the setup parameters can be modified by the operator without entering a pass-
		code.
		• No = The operator can change any set menu parameter without first entering the passcode
		even if the passcode is non-zero (default).
		• Yes = The operator must enter the passcode (if the passcode is non-zero) in order to change
		any setup menu parameters.
		This parameter can only be accessed using Power Wave Manager.
	P.506	Set User Interface Passcode
		Prevents unauthorized changes to the equipment. The default passcode is zero which allows
		full access. A nonzero passcode will prevent unauthorized:
		• changes to memory limits
		• saving to memory (if P.502 = Yes)
		• changes to setup parameters (if P.505 = Yes)
		This parameter can only be accessed using Power Wave Manager.

POWER FEED™ 25M