Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING & REPAIR
OUTPUT RECTIFIER BRIDGE REMOVAL AND REPLACEMENT (continued)
11.With the 7/16" wrench, install the choke lead and the #203 lead to the positive heat sink.
12.With the 7/16" wrench, install the "N" negative lead and the #204 lead to the negative heat sink.
13.With the 7/16" wrench, install the heavy leads W1 and W2 to the stud terminals.
14.Replace the top cover of the control box and tighten the 8 sheet metal screws with the 5/16" nut driver.
WELDANPOWER 125
