Test Procedure

Return to Section TOC

Return to Master TOC

F-27

ENGINE THROTTLE ADJUSTMENT TEST (continued)

FIGURE F.11 - BLOWER PADDLE MARKED FOR STROBE-TACH METHOD

	Mark
TEST PROCEDURE	WARNING

This test can be conducted by any of three			ENGINE EXHAUST can kill.
This test can be conducted by any of three
methods.
Strobe-tach Method:			Use in open, well ventilated
1. Remove the spark plug wire to prevent			areas or vent exhaust to the
1. Remove the spark plug wire to prevent			outside.
accidental kickback or starting.			outside.


2. With the black or red marking pencil, place	4. Reconnect the spark plug wire and start
a mark on one of the blower paddles,	4. Reconnect the spark plug wire and start
which can be reached through the vent		the engine. Direct the strobe-tach light on
slots in the end bracket. See Figure F.11.		the blower paddle and synchronize it to the
		rotating mark.

3.Connect the strobe-tach according the manufacturer's instructions.

WARNING

MOVING PARTS can injure.

Keep away from moving parts.

WELDANPOWER 125