Lucent Technologies 560-201-113 manual PassageWay Service Provider Requirements

Installing and Configuring the PassageWay

Service Provider

PassageWay Service Provider

Requirements

The PassageWay Service Provider requires the hardware and software listed below. Install the required hardware and software before installing the PassageWay Service Provider software. Note that system performance may be adverselyTaffected by lower system speeds and lower memory capacities.

an IBM-PC compatible or PS/2®-compatible PC with the following hardware:

an 80386 or higher processor

an available serial port

a minimum of 4 MB of RAM

a 3.5-inch, 1.44-MB, high-density diskette drive

a hard disk with at least 4 MB of space available

a VGA or better monitor

a Windows-compatible pointing device (a mouse or trackball is recommended)

NOTE:

You must have an available serial port in your PC that is dedicated to the PassageWay Service Provider. The PassageWay Service Provider cannot share a serial port with other devices.

If all the serial ports in your PC are already in use, you must purchase an additional serial port or free up an existing serial port to use with the PassageWay Service Provider. Consult Appendix A for more information on choosing a suitable serial port for the PassageWay Service Provider.

2-6