Installing and Configuring the PassageWay
Service Provider
27.Choose a button where a feature is assigned.
A submenu appears, displaying the following options:
Clear Button
Auto Dial
Call Forward
Do Not Disturb
Inspect
Cancel
28.Choose the appropriate feature for the selected button. The label for the selected feature appears on the button.
29.Repeat Steps 27 and 28 for any other buttons.
30.When you are finished, choose the Continue button.
The PassageWay Configurator - Complete message box appears.
31.Choose the OK button.
If you are using Windows 95 or Windows NT 4.0 or later, the Configuration Complete message box appears. Proceed to Step 32.
If you are using Windows 3.1 or later, the Telephony Drivers dialog box appears. Perform the followings steps:
a.In the Telephony Drivers dialog box, choose the Close button.
b.In the Telephony window, choose the Close button.
The Configuration Complete message box appears. Proceed to Step 32.
