Installing and Configuring the PassageWay
Service Provider
The PassageWay Service Provider operates with all versions of the following PARTNER systems:
PARTNER ACS
PARTNER Endeavor
PARTNER II
PARTNER Plus
PARTNER
NOTE:
Throughout this document, the term PARTNER is used to refer to all of the systems listed above.
For caller ID capabilities, you must have:
a PARTNER ACS, a PARTNER Endeavor, or a PARTNER II Release 3.0 or later system. A PARTNER ACS will provide caller ID (if available) for all outside lines connected to the control unit, a 206EC module, or a 400EC module. A PARTNER Endeavor will provide caller ID (if available) for all outside lines connected to the control unit or a 362EC module. A PARTNER II Release 3.0 or later system will provide caller ID (if available) for all outside lines connected to a 206EC module or a 400EC module.
outside lines subscribed to caller ID from your local telephone company.
a system telephone that has a display and a Caller ID Inspect button programmed. The Caller ID Inspect button is a display feature button that shows you
