Introduction
NOTE:
To determine whether you are using the proper issue of the Getting Started Guide for the PassageWay Service Provider installed on your PC, perform the following steps:
a. Start the PassageWay Configurator.
If you have Windows 95 or Windows NT 4.0 or later, select PassageWay Configurator from the application folder that contains the PassageWay Service Provider. (The default application folder is PassageWay for PARTNER.)
If you have Windows 3.1 or later or Windows for Workgroups 3.11 or later, open the program group that contains the PassageWay Service Provider, and
The PassageWay Configurator - COM Port dialog box appears.
b. Choose the Help button.
c. Depending on your system, perform one of the following steps:
If you have Windows 95 or Windows NT 4.0 or later, choose Version from the Help menu. The Version Information message box appears, displaying the issue of the Getting Started Guide that the software requires. The issue number should match the issue number on the cover of this book.
If you have Windows 3.1 or later or Windows for Workgroups 3.11 or later, choose About Help from the Help menu. The About Help message box appears, displaying the issue of the Getting Started Guide that the software requires. The issue number should match the issue number on the cover of this book.
d.Choose the OK button.
