Lucent Technologies 560-201-113 manual

Installing and Configuring the PassageWay

Service Provider

7.Connect the other end of the 7-foot, 2-pair, modular phone cord (D4BU) to the Line jack on your telephone.

8.Check the LED on the PassageWay adapter. The LED is located next to the Phone and Line jacks on the PassageWay adapter.

If the red LED is “on,” proceed to Step 9.

If the red LED is “off,” proceed to the section “PassageWay Adapter LEDs” in Chapter 4.

9.Turn on your PC.

Now, proceed to “Installing the Software.”

2-13