Motorola MC9S12DJ128B manual Table A-6 5V I/O Characteristics, 提供单片机解密、IC解密、芯片解密业务 010-62245566

MC9S12DT128B Device User Guide — V01.07

Table A-6 5V I/O Characteristics

Conditions are shown in Table A-4unless otherwise noted

Num	C			Rating	Symbol	Min	Typ	Max	Unit
1	P	Input High Voltage			VIH	0.65*VDD5	–		V
	T	Input High Voltage			VIH	–	–	VDD5 + 0.3
2	P	Input Low Voltage			VIL	–	–	0.35*VDD5	V
	T	Input Low Voltage			VIL	VSS5 – 0.3	–	–	V
3	C	Input Hysteresis			V		250		mV
					HYS
		Input Leakage Current (pins in high ohmic input
		mode)1			Iin
4	P	Vin = VDD5 or VSS5					–		μA
		ADC Inputs AN15:0				-1.0		1.0
		All other Ports (A, B, E, K, M, S, T)				–2.5		2.5
		Output High Voltage (pins in output mode)
5	C	Partial Drive IOH = –2.0mA			VOH	VDD5 – 0.8	–	–	V
	P	Full Drive I	OH	= –10.0mA
		Output Low Voltage (pins in output mode)
6	C	Partial Drive IOL = +2.0mA			V	–	–	0.8	V
	P				OL
		Full Drive I	OL	= +10.0mA
7	P	Internal Pull Up Device Current,			IPUL	–	–	–130	μA
		tested at VIL Max.
8	C	Internal Pull Up Device Current,			IPUH	–10	–	–	μA
		tested at VIH Min.
9	P	Internal Pull Down Device Current,			IPDH	–	–	130	μA
		tested at VIH Min.
10	C	Internal Pull Down Device Current,			IPDL	10	–	–	μA
		tested at VIL Max.
11	D	Input Capacitance			Cin		6	–	pF
12	T	Injection current2			IICS	–2.5	–	2.5	mA
		Single Pin limit
		Total Device Limit. Sum of all injected currents			IICP	–25		25
13	P	Port H, J, P Interrupt Input Pulse filtered 3			tPULSE			3	μs
14	P	Port H, J, P Interrupt Input Pulse passed 3			tPULSE	10			μs
NOTES:

1.Maximum leakage current occurs at maximum operating temperature. Current decreases by approximately one-half for each 8 C to 12 C in the temperature range from 50 C to 125 C.

2.Refer to Section A.1.4 Current Injection, for more details

3.Parameter only applies in STOP or Pseudo STOP mode.

90

http://www.xinpian.net 提供单片机解密、IC解密、芯片解密业务 010-62245566 13810019655