Motorola V400 GSM Synchronizing Data, Sending a Data or Fax Call, Receiving a Data or Fax Call

Serial Cable

Action

1Plug the serial cable into the

detachable head. Make sure that the Motorola logo on

the detachable

head and the metal shielding on the serial cable plug are both facing you.

2With the Motorola

logo and the phone both facing you, plug the detachable head into the phone’s accessory connector port.

3Plug the other end of the cable into the serial interface connection on the device and tighten the screws, if present.

USB Cable

Action

1Plug the end of the

cable with the

Motorola logo into the phone’s accessory connector port. Make sure that

the logo and the

phone are both facing you.

2Plug the other end—the USB connection—into the USB port on the device.

Synchronizing Data

You can synchronize phonebook and datebook information between your phone, computer, and PDA with BVRP Mobile PhoneTools software, an accessory for Motorola phones. See the Mobile PhoneTools user’s guide for more information.

Note: BVRP Mobile PhoneTools software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products.

Sending a Data or Fax Call

Use this procedure to send data or a fax from a connected computer or hand-held device using a CSD or GPRS network connection.

Action

1Make sure that the phone is connected and powered on.

2Open the application (such as dial-up-networking or fax) on your computer, and place the call through the application.

Note: You cannot dial data or fax numbers through your phone’s keypad. You must dial them through your computer, unless you are making a talk then fax call (see following section).

3When the transfer is complete, end the call from the connected device to close the connection.

Receiving a Data or Fax Call

Use this procedure to transfer data or a fax to a connected computer or hand-held device.

Transferring the Data or Fax

Your phone notifies you when the data or fax call arrives, and transfers the call to the connected device. Use the application running on the device to answer the call.

Ending the Data/Fax Connection

When the data or fax transfer is complete, end the call from the connected device to close the connection.

Making a Talk Then Fax Call

You can place a call where you talk and then send a fax to the same phone number within the same call.

Connect to the device that will send the fax, and do the following:

	Press	To
1	keypad keys	enter the phone number
2	M	open the Dialing Menu
3	S	scroll to Talk Then Fax
4	SELECT (+)	select Talk Then Fax
		Your selection applies to the
		next call only.
5	N	make the call
		Speak and, when ready,

initiate the fax transfer on the connected device. When the transfer is complete, end the call from the connected device.

Getting More Out Of Your Phone

33