Multi-Tech Systems CDMA Wireless Modem Cphs Command +CPHS, Change Default Player +WCDP, FctId

Chapter 14 – Specific AT Commands

CPHS Command +CPHS

Description: This command is used to activate, deactivate or interrogate a CPHS feature (e.g. Voice Mail Indicator). When performing an interrogation (mode = 2), the selected <FctId> CPHS feature is automatically enabled (status = 1).

	Note: This command may answer +CME ERROR: 3 if the CPHS feature is disabled.
Values:	<Mode>
	0: Deactivate a CPHS feature
	1: Activate a CPHS feature
	2: Interrogate a CPHS status
	<FctId>
	1: Voice Mail Indicator
	<Status>
	0: CPHS feature disabled
	1: CPHS feature enabled
Syntax:	Command syntax: AT+CPHS=<Mode>,<FctId>
	Command	Possible Responses
	AT+CPHS=<Mode>,<FctId>	OK
	AT+CPHS?	+CPHS: <Status>,<FctId1><CR<LF>
		OK
	AT+CPHS=?	+CPHS: (0-2),(1-1)
	Note: display the range of values	OK

Change Default Player +WCDP

Description: This command is used to select the default destination for the melody player.

Note: Selection of the player will have effect on the setting of the WCDM command.

Values:	<player>
	0: Speaker
	1: Buzzer
Syntax:	Command syntax: DP = <player>
	Command	Possible Responses
	AT+WCDP=?	+WCDP : (0-1)
		OK
	AT+WCDP=0	OK
	Select the speaker.
	AT+WCDP?	+WCDP: 0
		OK

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 104