Multi-Tech Systems CDMA Wireless Modem Excess SPC Failures +WLCK, Command syntax AT+WPLCK=level

Chapter 22 - Verizon® Specific AT Commands

Excess SPC Failures +WLCK

Description: This response indicates that 15 failed attempts have been made to enter the service programming code. If the modem is not in emergency mode, any active call will be terminated and the modem will go into offline mode.

Note: A successfully entered service programming code grants access to modem configuration data.

Syntax: Response Syntax: +WLCK: “Excess SPC failures!”

Command	Possible Responses
AT+WSPC=0,123456	+WLCK: “Excess SPC failures!”
Note: 15th attempt to enter the SPC.	Note: Modem now in offline mode.

Position Determination Lock Level +WPLCK

Description: This command specifies and returns the position determination lock setting. If the lock is set to ‘lock all’, then only E911-related position determination events are allowed and all other position determination requests are denied.

Values:	<level>
	0: No lock (allow all)
	1: Lock mobile initiated location services
	2: Lock mobile terminated location services
	3: Lock all
Syntax:	Command syntax: AT+WPLCK=<level>
	Command	Possible Responses
	AT+WPLCK=?	+WPLCK: (0-3)
	Note: Display valid parameter range	OK
	AT+WPLCK?	+WPLCK: 0
	Note: Request current setting type	OK
	AT+WPLCK=3	OK
	Note: Select lock all	Note: Command successful

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 186