Read SID/NID Entries +WSNR

Chapter 16 – Provisioning AT Commands

Description: This command is used to read the current SID/NID list entries. The displayed entry will always be the current value; including those changes made with the +WSID command prior to being committed to NV with the +WCMT command.

Values:	<index>
	0-19: Location in SID/NID list to read.
Syntax:	Command syntax: AT+WSNR=<index>
	Command	Possible Responses
	AT+WSNR=5	ERROR
	Note: Display entry 5 of SID/NID list.	Note: Service provisioning code not yet entered.
	AT+WSPC=1,000000	OK
	AT+WSNR=5	Note: Service code successfully entered.
	Note: Display entry 5 of SID/NID list.	+WSNR: 5, 123, 65535
		OK
		Note: Entry 5 of SID/NID list contains 123,65535.
	AT+WSNR?	+WSNR: 5
	Note: Show last read SID/NID list	OK
	index. Default: 0.
	AT+WSNR=?	+WSNR: (0-19)
	Note: Show SID/NID list index	OK
	range.

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C

129

Page 129

Image 129

Multi-Tech Systems CDMA Wireless Modem manual Read SID/NID Entries +WSNR, Location in SID/NID list to read

Contents

AT Commands For Cdma Wireless Modems Reference Guide Revision Level Date Description AT Commands for Cdma Wireless ModemsMulti-Tech logo is a trademark of Multi-Tech Systems, Inc Country By Email By Phone Contents Call Control Commands Supplementary Services Commands Position Determination GPS AT Commands Provisioning AT Commands 124 Reference Information 166 AT Command Examples 171 Table of Contents Related References Scope of This Document Definitions Format message is supported Power from the base stations the mobile seesCdma revision of the mobile or base station PRL is loaded into the phone and is saved in NV-RAM Line Settings Command LineInformation Responses and Result Codes Cell Broadcast Message Directly Displayed +CBM Cell Broadcast Message Stored in Memory +CBMICell Environment Description Indication +CCED SMS Status Report Indication Directly Displayed +CDS Call Waiting Indication +CCWASMS Status Report Indication Stored in Memory +CDSI Values Callerid Caller ID Presentation +CLIP Key Press or Release +CKEVIncoming Message Directly Displayed +CMT Type Incoming Message Stored in Memory +CMTI Mode Preference +COPSRegistration & Roaming +CREG Values stat Incoming Call +CRING RxLev Indication +CSQIncoming Call +RING Call Connected +WCNT Call Answered +WANSCall Ended +WEND Values Call type Flash Indication +WFSH Feature Notification Message +WFNMResponse syntax +WEND reason ATH General Indicator +WIND Call Originated +WORG Command syntax AT+WIND=IndLevelCall Privacy Indication +WPRV Prv Roaming Indication +WROM Emergency Mode +WSOSRoam Flag Voice Mail Indicator +WVMI Current NAM Change +WNAMSMS Message Storage Full +WMGF Leaving power save Entering power save Power Save +WSPSResponse Syntax +WSPS state State Electronic Serial Number +CGSN Request Revision Identification +CGMRSelect TE Character Set +CSCS Values Character Set Request Imsi +CIMI Repeat Last Command aCapabilities List +GCAP Phone Offline +CPOF Set Phone Functionality +CFUN Command syntax AT+CFUN=functionality levelValues Functionality level AT+CFUN? Command syntax AT+CMEE=error reporting flag Report Mobile Equipment Errors +CMEEPhone Activity Status +CPAS Keypad Control +CKPD Command syntax AT+CRMP=call type,volume,type,index Command syntax AT+CCLK=date and time stringClock Management +CCLK Ring Melody Playback +CRMP Subscriber Number +CNUM Ringer Sound Level +CRSLSelect Type of Address +CSTA Values Sound level Command syntax AT+WMSN View Modem Timers +WTMRModem Serial Number +WMSN AT+WTMR Dial Command D Command syntax ATDnbDirect Dial Syntax Command syntax ATDindex ATDmemname ATDmemindex Hang-Up Command HCommand syntax ATH Phonebook Syntax Command syntax ATA Extended Error Report +CEERCommand syntax AT+CEER Answer a Call a Dtmf Start and Stop Continuous +WSDT, +WSDS Dtmf Signals +VTD, +VTS Redial Last Telephone Number DL Automatic Dialing with DTR %DnAutomatic Answer S0 Command syntax AT+CICB=mode Values ModeCommand syntax AT+CSNS Incoming Call Bearer +CICB Microphone Gain +VGT Volume Gain Control +VGR Microphone Mute Control +CMUT Speaker & Microphone Selection +SPEAKERValues ActiveSpkMic Side Tone Modification +SIDET Echo Cancellation +ECHOValues Val1 Val2 Initialize Voice Parameters +VIP TTY Mode +WTTYAT+VIP AT+WTTY Valid value ranges Represents an unknown signal quality Signal Quality +CSQAutomatic Cdma Only Cdma or Amps only Analog only AT+CSQ Band Band Preference +WBND Command syntax AT+WRMP=mode Home Networks only, as defined in the PRL default valueRoam Preference +WRMP Roaming on Affiliated networks, as defined in the PRL Stat Network Registration & Roaming +CREG Change NAM Selection +WNAM Read Current NAM +WCNMValues Nam AT+WSOS=1 Error Command syntax AT+WSOS=flagAT+WSOS? AT+WSOS=? Enable output of ERI indicators 64 through Suppress output of ERI indicators 64 throughCommand syntax AT+WRMW=value Extended Roam Indication +WRMW Enter PIN +CPIN SIM Card Operational Commands Command syntax AT+CPINC Response syntax +CPINC n1,n2,k1,k2 Enter PIN2 +CPIN2PIN Remaining Attempt Number +CPINC Passwd Facility Lock +CLCKAT+CLCK? AT+CLCK=AO,2 Card Identification +CCID Change Password +CPWDOldpwd Newpwd Parameters Definition New Message Acknowledgement +CNMA Select Message Service +CSMS Preferred Message Storage +CPMS Show Text Mode Parameters +CSDH Bfr New Message Indication +CNMI Oa/da Read Message +CMGR AT+CMGR=2 +CMS Error AT+CPMS=SR+CNMI=,,,2 AT+CMGR=1AT+CMSS=3 List Message +CMGL Index Place of storage in memoryEncoding Length Length of the text message in bytes Send Message +CMGS Da Destination address value in string formatCbn Call Back Number Send Message From Storage +CMSS Write Message to Memory +CMGW Delete Message +CMGD Command syntax AT+CMGD=Index ,DelFlagValues index DelFlag Select Broadcast Messages +CSCB Command syntax AT+CSCB=modeMessage Status Modification +WMSC Message Change SMS Status +WUSS Message Overwriting +WMGO Set Timestamp of MT SMS +WSTM Set SMS Compose Language and Encoding +WSCLValues Lang Enc Command syntax AT+CCFC= number Command e.g. ATD*72 ForwardedCall Forwarding +CCFC Number The phone number to forward all calls to Calling Line Identification Presentation +CLIP Calling Line Identification Restriction +CLIR AT+WFSH Send Flash to Base Station +WFSH List Current Call State +CLCC Select Mode +FCLASS Using AT Commands During a Data ConnectionSwitch From Online to Offline Mode Switch From Offline to Online Mode Disables reporting of local port rate Command syntax AT+CRCCommand syntax AT+ILRR=value Cellular Result Codes +CRC Command syntax AT+DS=dir,neg,P1,P2 V42 Bis Data Compression +DSAT+DS? Disable reporting Enable reporting This syntax is for setting the +DR reporting methodCommand syntax AT+DR=val V42 Bis Data Compression Report +DR Fixed DTE Rate +IPR Command syntax AT+ICF= format, parityDTE-DCE Character Framing +ICF Values Format DTE-DCE Local Flow Control +IFC Set DCD Signal &C Set DSR Signal &S Set DTR Signal &DBack to Online Mode O Result Code Suppression Q Auto-Tests &T DCE Response FormatEcho E Values Num Display Configuration &V Command syntax AT&VAT&V Save Configuration &W Restore Factory Setting &FCommand syntax ATInum Request Identification Information Select Phonebook Memory Storage +CPBS Command syntax AT+CPBS=bkAT+CPBS=? AT+CPBS=EN AT+CPBS? Command syntax AT+CPBF=string Command syntax AT+CPBU?Return Selected Phonebook Locations +CPBU Find Phonebook Entries +CPBF String Write Phonebook Entry +CPBW+CME Erro AT+CPIN2? Ruim PIN2 Command syntax AT+CPBP= phone number Command syntax AT+CPBR=first,lastPhonebook Read +CPBR Phonebook Search +CPBP Avoid Phonebook Init +WAIP Delete Calls From Phonebook +WDCPValues Call phonebook Command syntax AT+WPDST=type This command sets and returns the PD session typePosition Determination Session Type +WPDST Session to provide the last position info available Position Determination Operating Mode +WPDOM Position Determination Data Download +WPDDDDuration Position Determination NV Privacy Level +WPPRV Position Determination Privacy Level +WPDPLTime Values Level Values Setting Position Determination Transport Setting +WPTLMCommand syntax AT+WPTLM=setting DBM Data Burse Message Position Determination Start Session +WPDSS Values ServicePosition Determination End Session +WPDES Performance Position Determination Start Session Result +WPDSS AT+WPDSS=PAT+WPDSS=PV Set Port of gpsOne Session +WPDPT Set IP Address of gpsOne Session +WPDIPValues Ipaddress Values Port Request Model Identification +WGMM Manufacturer Identification +WGMICell Environment and RxLev Indication +CCED Requested dump Command syntax AT+CCED=mode, requested dump Mobile Equipment Event Reporting +CMER Analog Digital Converters Measurements +ADC Write Gpio Value +WIOW Read Gpio Value +WIORGpio to read Value Play Tone +WTONE AT+WTONE?AT+WTONE=0 AT+WTONE=? Play Dtmf Tone +WDTMF Hardware Version +WHWVMode=1 Select Voice Gain +WSVG Status Request +WSTRValues Path 32kHz Sleep Mode +W32K Ring Indicator Mode +WRIM Default Change Default Melody +WCDMSoftware Version +WSSW Values Melody Custom Character Set +WCCS Command syntax AT+WCCS=mode,table,char 1,char Change Default Player +WCDP Cphs Command +CPHSFctId Status Set Standard Tone +WSST Reset +WRST Command syntax AT+WPRV=voice privacy level Normal default PrivateSet Voice Privacy Level +WPRV Values Voice privacy level AT+CSQ? +CME Error Command syntax AT+WPIN=mode,current val,new valSecurity PIN +WPIN Current val & new val Request PRL Version Information +WPRL Minute Alert +WMBPInterval Values Bitmap value Configure LED Indicator +CLEDBit Bit 2 bit7 Reserved Syntax Keypad Enable/Disable +WPAD Keypad disabled Keypad enabledCommand syntax AT+WPAD=mode Summary Overview of SIM Application ToolKitFunctionality Profile Download Data Download to SIM Messages Exchanged During a SIM ToolKit OperationMenu Selection Call control by SIM 113 Timeout ConfigSIM ToolKit Set Facilities +STSF Autoresponse Error Codes SIM ToolKit Indication +STINUnsolicited Result Last SIM Toolkit Indication AT+STIN? +CME ErrorAT+STIN? AT+STGI=0 SIM ToolKit Get Information +STGI Command syntax +STGI=Cmd+STGI=? +STGI Idx 1 Alpha Identifier menuNbItems 1 Alpha Idx Label CalledNb DefaultItem 1SubAdress Class Error Codes Values when Cmd=11 Setup Event ListUnsolicited Result SIM ToolKit Control Response +STCR Evt Values CmdType SIM ToolKit Give Response +STGR Possible Error Codes Values when CmdType=4 Setup callDetected Indication +STIN has not been received +STGR=? Command syntax +STGR=CmdType,Result,Data Mobile Directory Number +WMDN Service Programming Code +WSPCValues Lock type Code SID and NID +WSID Set Imsi +WIMISID number NID number Slot Cycle Index +WSCI Access Overload Class +WAOCPrimary Browser Gateway +WBGP Secondary Browser Gateway +WBGS Packet Dial String +WPDS Primary Cdma Channels +WPCCSecondary Cdma Channels +WSCC Values enable Service Option Management +WSOMCommit Changes +WCMT Home page SO 0 IS96A Command syntax AT+WSNR=index Read SID/NID Entries +WSNRLocation in SID/NID list to read Service Programming Example Error AT+WPDS?AT+WSCI=1 AT+WCMT=0 Remote Async/Fax Command Reset to Default Configuration Z0Select Tone Dialing T Command syntax ATSn=value Command syntax ATPSelect Pulse Dialing P Basic S-Registers SX Defaultlength Error Control Operation +EBNumeric Parameter Control +EFCS Values Breakselection Error Control Selection +ES Error Control Report +ERValues Origrqst Origfbk Error Control Selection +ETBM Error Control Selection +ESRTimer Values PendingTD Request Manufacture Identification +GMI Request Manufacture Identification +GMMRequest Revision Identification +GMR Request Product Serial Number Identification +GSN Request Global Object Identification +GOIModulation Selection +MS Modulation Automode Control +MA Modulation Reporting Control +MRReporting Control +MV18R Selection +MV18S FbktimeenableCellular Extension +CXT Dfltansmode Configuration String +CFG Query Service +CADUm Interface Data Compression Reporting +CDR Command syntax AT+CRM=Val Command syntax AT+CDS=ValUm Interface Data Compression +CDS Set Rm Interface Protocol +CRM Command State Inactivity Timer +CQD Battery Charge +CBCCommand syntax AT+CQD=val Command syntax AT+CMIP AT+CBIP? Error Command syntax AT+CBIPBase Station IP Address +CBIP AT+CBIP? Serving System +CSS Values ClassPA PF PCS Command syntax AT+CFC=Val Command syntax AT+CMUX=nSelect Multiplex Option +CMUX Um Interface Fax Compression +CFC Dial Command for Voice Calls +CDV IWF Content List +CGCAPHang-up Voice +CHV Command syntax AT+CGOI Um Packet Data Inactivity Timer +CTACommand syntax AT+CTA=val IWF Device Identification +CGOI IS-707.3 Fax Parameters IS-707.3 Fax Action Commands Command syntax AT$QCDMG Transition to Diagnostics Monitor $QCDMGCommand syntax AT$QCQNC=Val Quick Net Connect $QCQNC Originate M-to-M Packet Data Call $QCMTOM Protocol Revision in Use $QCPREVDump RLP Protocol Statistics $QCRLPD Values Number Reset PPP Protocol Statistics $QCPPPR Reset RLP Protocol Statistics $QCRLPRDump PPP Protocol Statistics $QCPPPD Dump IP Protocol Statistics $QCIPD Reset UDP Protocol Statistics $QCUDPR Reset IP Protocol Statistics $QCIPRDump UDP Protocol Statistics $QCUDPD Dump TCP Protocol Statistics $QCTCPD Reset TCP Protocol Statistics $QCTCPR Set Data Service Option $QCSOClear Mobile Error Log $QCCLR Pre-arrangement Setting $QCVAD Answer Incoming Voice Call $QCCAVAutomatic Packet Detection $QCPKND Command syntax AT$QCRL3D Command syntax AT$QCMDR=ValSet DM Baud Rate $QCDMR Set Medium Data Rate $QCMDR Reset RLP 3 Protocol Statistics $QCRL3R SCRM’ing Selection $QCSCRMSCH Selection $QCTRTL SCH Selection $QCMIP Command syntax AT$QCMIP=ValAT$QCMIP? AT$QCMIP=? AT$QCMIP=0 MIP Selection $QCMIPP RFC2002bis Selection $QCMIPTCurrent Active Profile $QCMIPEP String The network access identifier text to be stored Command syntax AT$QCMIPGETP=ValCommand syntax AT$QCMIPNAI=String,Val Return Profile Information $QCMIPGETP Set MN-AAA Shared Secrets $QCMIPMASS Set Reverse Tunneling $QCMIPRT Set MN-AAA Shared Secrets $QCMIPMASSX Set MN-HA Shared Secrets $QCMIPMHSS Command syntax AT$QCMIPMASPI =SPI,Val Command syntax AT$QCMIPMHSSX =HEX,ValSet MN-HA Shared Secrets $QCMIPMHSSX Set MN-AAA Shared Secrets $QCMIPMASPI Command syntax AT$QCMIPPHA =IP,Val Command syntax AT$QCMIPMHSPI =SPI,ValSet MN-HA Shared Secrets $QCMIPMHSPI Set Primary HA IP Address $QCMIPPHA Command syntax AT$QCMIPHA =IP,Val Command syntax AT$QCMIPSHA =IP,ValSet Secondary HA IP Address $QCMIPSHA Set Home HA IP Address $QCMIPHA MS Error Result Code +CME Error error Specific Error Result Codes Message Service Failure Result Code +CMS Error errorExtended Error Report +CEER Call Processing Codes Final Result Codes Parameters Storage Intermediate Result Codes Code Meaning Codes for SMS-STATUS-REPORT +CDS and +CMGR AT Commands for Amps Operation AT Commands Supported When SIM Card Removed Examples Where a Voice Call is Originated Example 1 When the MS Has Already Been Powered OnExample When the MS is powered on Example with Incoming Calls Examples About Short Messages Example of a Call Waiting SituationExample 1 Receive a Short Message Example 2 Send a Short Message AT+WSCL=6,4 Example 3 Read Short Messages Status report Ind Message type indicatorMO delivery acknowledge message Mr Message Reference Roaming Indication +WROM Chapter Incoming Message Directly Displayed +CMT Chapter Enhanced Roaming Indication +WERI AT+WSOS +WSOS0 AT+COPS=0,0 Emergency Mode +WSOS Chapter Only if the message privacy value is 0 Normal Read message +CMGR Chapter 179 List Message +CMGL Chapter Command syntax AT+CMGL=statResponse syntax +CMGL index,stat,da/oa,lang Encod,lengthCRLFdata for SMS-DELIVER and SMS-SUBMIT, may be Send Message +CMGS Chapter Reply Message reply optionNo Acknowledge Cbn CR entered text ctrl-Z / ESC Write Message to Memory +CMGW Chapter Service Programming Code +WSPC Chapter Verizon. System Selection +WVSSSyntax +WVSS pref Programming In Progress +WOT1 Initial Programming Required +WOT0Programming Successful +WOT2 Programming Unsuccessful +WOT3 NAM Download Ok +WOTN SPL Unlocked +WOTSMDM Download Ok +WOTM MSI Download Ok +WOTI Excess SPC Failures +WLCK Command syntax AT+WPLCK=levelPosition Determination Lock Level +WPLCK AT+WPLCK=? Response Syntax +CDS ind, mr, ra, tora, scts, dt, st Text mode AT+CSQ Use any four digit value. e.g Allow data calls Barr data calls Query statusSyntax for Facility Lock AT+CLCK=AO,9 190 Channel No service 800 MHz 1900 MHz Boot URL +WBURL Packet Zone Identifier +PZIDTrusted Domain +WTDMN Proxy Address +WDPXY Wiota Connection Control +WIOTASprint. System Selection +WSSS Preparing Data Services +WOAP Iota Error +WOAECommand syntax +WSUM? Please Retry +WOAR Reset MIN and MDN to factory defaults +WRMM Command syntax +WRMMAT+WRMM

Multi-Tech Systems CDMA Wireless Modem Read SID/NID Entries +WSNR, Command syntax AT+WSNR=index

Models: CDMA Wireless Modem

Read SID/NID Entries +WSNR

Values:

0-19: Location in SID/NID list to read.

Syntax:

Command syntax: AT+WSNR=<index>