Multi-Tech Systems CDMA Wireless Modem manual Display Configuration &V, Command syntax AT&V, At&V

Chapter 11 – V24-V25 Commands

Display Configuration &V

Description: This command is used to display the modem configuration. It lists all the commands supported by the modem and their possible parameters.

Values: <num>

0:Manufacturer data

1:Not used

2:Not used

3:Software revision data

4:Not used

5:Configuration data

6:Capability data

7:Not used

Note: For the data returned by the ATI6 command, the use of the IS-707 +GCAP command is preferred.

Syntax:	Command syntax: AT&V
	Command	Possible Responses
	AT&V	&C: 2; &D: 2; …
	Note: Display the active parameter settings	…
		OK

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 80