Multi-Tech Systems CDMA Wireless Modem Packet Dial String +WPDS, Primary Cdma Channels +WPCC

Chapter 16 – Provisioning AT Commands

Packet Dial String +WPDS

Description: This command is used to set the packet dial string.

Values:	<string>
	A string of length 0 to 16 characters.
Syntax:	Command syntax: AT+WPDS=<string>
	Command	Possible Responses
	AT+WPDS?	+WPDS: ”#777”
		OK
	Note: Get current Packet Dial String	Note: Current Packet Dial String is #777
	AT+WPDS=”#999”	OK
	Note: Set the Packet Dial String to #999

Primary CDMA Channels +WPCC

Description: This command is used to set the primary CDMA channels for 800Mhz CDMA operation only. Values entered must be valid CDMA 800Mhz Channel numbers.

Values:	<channel a number>
	Value range: 0 – 2047
	<channel b number>
	Value range: 0 – 2047

Syntax: Command syntax: AT+WPCC=<channel a number>,<channel b number>

Command	Possible Responses
AT+WPCC?	+WPCC: 283,384
Note: Get current primary CDMA channels	OK
AT+WPCC=211,432	OK
Note: Set the primary CDMA channels

Secondary CDMA Channels +WSCC

Description: This command is used to set the secondary CDMA channels for 800Mhz CDMA operation only. Values entered must be valid CDMA 800Mhz Channel numbers.

Values:	<channel a number>
	Value range: 0 – 2047
	<channel b number>
	Value range: 0 – 2047
Syntax:	Command syntax: AT+WSCC=<channel a number>,<channel b number>
	Command	Possible responses
	AT+WSCC?	+WPCC: 691,777
	Note: Get current secondary CDMA channels	OK
	AT+WPCC=511,632	OK
	Note: Set the secondary CDMA channels

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 127