Command syntax AT+CBIP | Multi-Tech Systems CDMA Wireless Modem

Chapter 17 – Extended AT Commands in IS707.3

Base Station IP Address +CBIP

Description: This read-only command is used to display the base station’s temporary IP address. The value displayed is in standard IP address format.

Note: This command returns an IP value only during a data call when a temporary IP address has been assigned. When not in a data call, this command returns “OK”.

Syntax:	Command syntax: AT+CBIP
	Command	Possible Responses
	AT+CBIP?	+CBIP: 198.229.142.65
	Note: Display the current setting	OK
		Note: Command is valid
	AT+CBIP?	OK
	Note: Display the current setting	Note: No IP address assigned.
	AT+CBIP	ERROR
		Note: Command is not valid

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C

143

Page 143

Image 143

Multi-Tech Systems CDMA Wireless Modem Base Station IP Address +CBIP, Command syntax AT+CBIP, At+Cbip?, AT+CBIP? Error

Contents

AT Commands For Cdma Wireless Modems Reference Guide Country By Email By Phone AT Commands for Cdma Wireless ModemsRevision Level Date Description Multi-Tech logo is a trademark of Multi-Tech Systems, Inc Contents Call Control Commands Supplementary Services Commands Position Determination GPS AT Commands Provisioning AT Commands 124 Reference Information 166 AT Command Examples 171 Table of Contents Related References Scope of This Document Definitions PRL is loaded into the phone and is saved in NV-RAM Power from the base stations the mobile seesFormat message is supported Cdma revision of the mobile or base station Information Responses and Result Codes Line SettingsCommand Line Cell Environment Description Indication +CCED Cell Broadcast Message Directly Displayed +CBMCell Broadcast Message Stored in Memory +CBMI Values Callerid Call Waiting Indication +CCWASMS Status Report Indication Directly Displayed +CDS SMS Status Report Indication Stored in Memory +CDSI Type Key Press or Release +CKEVCaller ID Presentation +CLIP Incoming Message Directly Displayed +CMT Values stat Mode Preference +COPSIncoming Message Stored in Memory +CMTI Registration & Roaming +CREG Incoming Call +RING Incoming Call +CRINGRxLev Indication +CSQ Values Call type Call Answered +WANSCall Connected +WCNT Call Ended +WEND ATH Feature Notification Message +WFNMFlash Indication +WFSH Response syntax +WEND reason General Indicator +WIND Prv Command syntax AT+WIND=IndLevelCall Originated +WORG Call Privacy Indication +WPRV Flag Emergency Mode +WSOSRoaming Indication +WROM Roam SMS Message Storage Full +WMGF Voice Mail Indicator +WVMICurrent NAM Change +WNAM State Power Save +WSPSLeaving power save Entering power save Response Syntax +WSPS state Values Character Set Request Revision Identification +CGMRElectronic Serial Number +CGSN Select TE Character Set +CSCS Phone Offline +CPOF Repeat Last Command aRequest Imsi +CIMI Capabilities List +GCAP AT+CFUN? Command syntax AT+CFUN=functionality levelSet Phone Functionality +CFUN Values Functionality level Keypad Control +CKPD Report Mobile Equipment Errors +CMEECommand syntax AT+CMEE=error reporting flag Phone Activity Status +CPAS Ring Melody Playback +CRMP Command syntax AT+CCLK=date and time stringCommand syntax AT+CRMP=call type,volume,type,index Clock Management +CCLK Values Sound level Ringer Sound Level +CRSLSubscriber Number +CNUM Select Type of Address +CSTA AT+WTMR View Modem Timers +WTMRCommand syntax AT+WMSN Modem Serial Number +WMSN Direct Dial Syntax Dial Command DCommand syntax ATDnb Phonebook Syntax Hang-Up Command HCommand syntax ATDindex ATDmemname ATDmemindex Command syntax ATH Answer a Call a Extended Error Report +CEERCommand syntax ATA Command syntax AT+CEER Dtmf Start and Stop Continuous +WSDT, +WSDS Dtmf Signals +VTD, +VTS Automatic Answer S0 Redial Last Telephone Number DLAutomatic Dialing with DTR %Dn Incoming Call Bearer +CICB Values ModeCommand syntax AT+CICB=mode Command syntax AT+CSNS Microphone Gain +VGT Volume Gain Control +VGR Values ActiveSpkMic Microphone Mute Control +CMUTSpeaker & Microphone Selection +SPEAKER Val2 Echo Cancellation +ECHOSide Tone Modification +SIDET Values Val1 AT+WTTY TTY Mode +WTTYInitialize Voice Parameters +VIP AT+VIP AT+CSQ Signal Quality +CSQValid value ranges Represents an unknown signal quality Automatic Cdma Only Cdma or Amps only Analog only Band Band Preference +WBND Roaming on Affiliated networks, as defined in the PRL Home Networks only, as defined in the PRL default valueCommand syntax AT+WRMP=mode Roam Preference +WRMP Stat Network Registration & Roaming +CREG Values Nam Change NAM Selection +WNAMRead Current NAM +WCNM AT+WSOS=? Command syntax AT+WSOS=flagAT+WSOS=1 Error AT+WSOS? Extended Roam Indication +WRMW Suppress output of ERI indicators 64 throughEnable output of ERI indicators 64 through Command syntax AT+WRMW=value Enter PIN +CPIN SIM Card Operational Commands PIN Remaining Attempt Number +CPINC Command syntax AT+CPINC Response syntax +CPINC n1,n2,k1,k2Enter PIN2 +CPIN2 AT+CLCK=AO,2 Facility Lock +CLCKPasswd AT+CLCK? Newpwd Change Password +CPWDCard Identification +CCID Oldpwd Parameters Definition New Message Acknowledgement +CNMA Select Message Service +CSMS Preferred Message Storage +CPMS Show Text Mode Parameters +CSDH Bfr New Message Indication +CNMI Oa/da Read Message +CMGR AT+CMSS=3 AT+CMGR=2 +CMS Error AT+CPMS=SR+CNMI=,,,2AT+CMGR=1 Encoding Length Length of the text message in bytes List Message +CMGLIndex Place of storage in memory Cbn Call Back Number Send Message +CMGSDa Destination address value in string format Send Message From Storage +CMSS Write Message to Memory +CMGW DelFlag Command syntax AT+CMGD=Index ,DelFlagDelete Message +CMGD Values index Message Command syntax AT+CSCB=modeSelect Broadcast Messages +CSCB Message Status Modification +WMSC Change SMS Status +WUSS Message Overwriting +WMGO Enc Set SMS Compose Language and Encoding +WSCLSet Timestamp of MT SMS +WSTM Values Lang Number The phone number to forward all calls to Command e.g. ATD*72 ForwardedCommand syntax AT+CCFC= number Call Forwarding +CCFC Calling Line Identification Presentation +CLIP Calling Line Identification Restriction +CLIR AT+WFSH Send Flash to Base Station +WFSH List Current Call State +CLCC Switch From Offline to Online Mode Using AT Commands During a Data ConnectionSelect Mode +FCLASS Switch From Online to Offline Mode Cellular Result Codes +CRC Command syntax AT+CRCDisables reporting of local port rate Command syntax AT+ILRR=value AT+DS? Command syntax AT+DS=dir,neg,P1,P2V42 Bis Data Compression +DS V42 Bis Data Compression Report +DR This syntax is for setting the +DR reporting methodDisable reporting Enable reporting Command syntax AT+DR=val Values Format Command syntax AT+ICF= format, parityFixed DTE Rate +IPR DTE-DCE Character Framing +ICF DTE-DCE Local Flow Control +IFC Set DCD Signal &C Result Code Suppression Q Set DTR Signal &DSet DSR Signal &S Back to Online Mode O Values Num DCE Response FormatAuto-Tests &T Echo E AT&V Display Configuration &VCommand syntax AT&V Request Identification Information Restore Factory Setting &FSave Configuration &W Command syntax ATInum AT+CPBS=EN AT+CPBS? Command syntax AT+CPBS=bkSelect Phonebook Memory Storage +CPBS AT+CPBS=? Find Phonebook Entries +CPBF Command syntax AT+CPBU?Command syntax AT+CPBF=string Return Selected Phonebook Locations +CPBU AT+CPIN2? Ruim PIN2 Write Phonebook Entry +CPBWString +CME Erro Phonebook Search +CPBP Command syntax AT+CPBR=first,lastCommand syntax AT+CPBP= phone number Phonebook Read +CPBR Values Call phonebook Avoid Phonebook Init +WAIPDelete Calls From Phonebook +WDCP Session to provide the last position info available This command sets and returns the PD session typeCommand syntax AT+WPDST=type Position Determination Session Type +WPDST Duration Position Determination Operating Mode +WPDOMPosition Determination Data Download +WPDDD Values Level Position Determination Privacy Level +WPDPLPosition Determination NV Privacy Level +WPPRV Time DBM Data Burse Message Position Determination Transport Setting +WPTLMValues Setting Command syntax AT+WPTLM=setting Performance Values ServicePosition Determination Start Session +WPDSS Position Determination End Session +WPDES AT+WPDSS=PV Position Determination Start Session Result +WPDSSAT+WPDSS=P Values Port Set IP Address of gpsOne Session +WPDIPSet Port of gpsOne Session +WPDPT Values Ipaddress Requested dump Manufacturer Identification +WGMIRequest Model Identification +WGMM Cell Environment and RxLev Indication +CCED Command syntax AT+CCED=mode, requested dump Mobile Equipment Event Reporting +CMER Analog Digital Converters Measurements +ADC Value Read Gpio Value +WIORWrite Gpio Value +WIOW Gpio to read AT+WTONE=0 AT+WTONE=? Play Tone +WTONEAT+WTONE? Mode=1 Play Dtmf Tone +WDTMFHardware Version +WHWV Values Path Select Voice Gain +WSVGStatus Request +WSTR 32kHz Sleep Mode +W32K Ring Indicator Mode +WRIM Values Melody Change Default Melody +WCDMDefault Software Version +WSSW Custom Character Set +WCCS Command syntax AT+WCCS=mode,table,char 1,char Status Cphs Command +CPHSChange Default Player +WCDP FctId Set Standard Tone +WSST Reset +WRST Values Voice privacy level Normal default PrivateCommand syntax AT+WPRV=voice privacy level Set Voice Privacy Level +WPRV Current val & new val Command syntax AT+WPIN=mode,current val,new valAT+CSQ? +CME Error Security PIN +WPIN Interval Request PRL Version Information +WPRLMinute Alert +WMBP Bit 2 bit7 Reserved Syntax Configure LED Indicator +CLEDValues Bitmap value Bit Command syntax AT+WPAD=mode Keypad Enable/Disable +WPADKeypad disabled Keypad enabled Profile Download Overview of SIM Application ToolKitSummary Functionality Call control by SIM Messages Exchanged During a SIM ToolKit OperationData Download to SIM Menu Selection 113 Autoresponse ConfigTimeout SIM ToolKit Set Facilities +STSF Unsolicited Result Error CodesSIM ToolKit Indication +STIN AT+STGI=0 AT+STIN? +CME ErrorLast SIM Toolkit Indication AT+STIN? +STGI Command syntax +STGI=CmdSIM ToolKit Get Information +STGI +STGI=? Alpha Idx Label Alpha Identifier menuIdx 1 NbItems 1 Class DefaultItem 1CalledNb SubAdress Evt Values when Cmd=11 Setup Event ListError Codes Unsolicited Result SIM ToolKit Control Response +STCR Values CmdType SIM ToolKit Give Response +STGR Indication +STIN has not been received Values when CmdType=4 Setup callPossible Error Codes Detected +STGR=? Command syntax +STGR=CmdType,Result,Data Code Service Programming Code +WSPCMobile Directory Number +WMDN Values Lock type NID number Set Imsi +WIMISID and NID +WSID SID number Secondary Browser Gateway +WBGS Access Overload Class +WAOCSlot Cycle Index +WSCI Primary Browser Gateway +WBGP Secondary Cdma Channels +WSCC Packet Dial String +WPDSPrimary Cdma Channels +WPCC Home page SO 0 IS96A Service Option Management +WSOMValues enable Commit Changes +WCMT Location in SID/NID list to read Command syntax AT+WSNR=indexRead SID/NID Entries +WSNR AT+WSCI=1 AT+WCMT=0 Service Programming ExampleError AT+WPDS? Select Tone Dialing T Remote Async/Fax CommandReset to Default Configuration Z0 Basic S-Registers SX Command syntax ATPCommand syntax ATSn=value Select Pulse Dialing P Values Breakselection Error Control Operation +EBDefaultlength Numeric Parameter Control +EFCS Origfbk Error Control Report +ERError Control Selection +ES Values Origrqst Values PendingTD Error Control Selection +ESRError Control Selection +ETBM Timer Request Revision Identification +GMR Request Manufacture Identification +GMIRequest Manufacture Identification +GMM Modulation Selection +MS Request Product Serial Number Identification +GSNRequest Global Object Identification +GOI Reporting Control +MV18R Modulation Automode Control +MAModulation Reporting Control +MR Dfltansmode FbktimeenableSelection +MV18S Cellular Extension +CXT Um Interface Data Compression Reporting +CDR Configuration String +CFGQuery Service +CAD Set Rm Interface Protocol +CRM Command syntax AT+CDS=ValCommand syntax AT+CRM=Val Um Interface Data Compression +CDS Command syntax AT+CMIP Battery Charge +CBCCommand State Inactivity Timer +CQD Command syntax AT+CQD=val AT+CBIP? Command syntax AT+CBIPAT+CBIP? Error Base Station IP Address +CBIP PA PF PCS Serving System +CSSValues Class Um Interface Fax Compression +CFC Command syntax AT+CMUX=nCommand syntax AT+CFC=Val Select Multiplex Option +CMUX Hang-up Voice +CHV Dial Command for Voice Calls +CDVIWF Content List +CGCAP IWF Device Identification +CGOI Um Packet Data Inactivity Timer +CTACommand syntax AT+CGOI Command syntax AT+CTA=val IS-707.3 Fax Parameters IS-707.3 Fax Action Commands Quick Net Connect $QCQNC Transition to Diagnostics Monitor $QCDMGCommand syntax AT$QCDMG Command syntax AT$QCQNC=Val Values Number Protocol Revision in Use $QCPREVOriginate M-to-M Packet Data Call $QCMTOM Dump RLP Protocol Statistics $QCRLPD Dump IP Protocol Statistics $QCIPD Reset RLP Protocol Statistics $QCRLPRReset PPP Protocol Statistics $QCPPPR Dump PPP Protocol Statistics $QCPPPD Dump TCP Protocol Statistics $QCTCPD Reset IP Protocol Statistics $QCIPRReset UDP Protocol Statistics $QCUDPR Dump UDP Protocol Statistics $QCUDPD Clear Mobile Error Log $QCCLR Reset TCP Protocol Statistics $QCTCPRSet Data Service Option $QCSO Automatic Packet Detection $QCPKND Pre-arrangement Setting $QCVADAnswer Incoming Voice Call $QCCAV Set Medium Data Rate $QCMDR Command syntax AT$QCMDR=ValCommand syntax AT$QCRL3D Set DM Baud Rate $QCDMR SCH Selection $QCTRTL Reset RLP 3 Protocol Statistics $QCRL3RSCRM’ing Selection $QCSCRM AT$QCMIP=0 Command syntax AT$QCMIP=ValSCH Selection $QCMIP AT$QCMIP? AT$QCMIP=? Current Active Profile $QCMIPEP MIP Selection $QCMIPPRFC2002bis Selection $QCMIPT Return Profile Information $QCMIPGETP Command syntax AT$QCMIPGETP=ValString The network access identifier text to be stored Command syntax AT$QCMIPNAI=String,Val Set MN-AAA Shared Secrets $QCMIPMASS Set Reverse Tunneling $QCMIPRT Set MN-AAA Shared Secrets $QCMIPMASSX Set MN-HA Shared Secrets $QCMIPMHSS Set MN-AAA Shared Secrets $QCMIPMASPI Command syntax AT$QCMIPMHSSX =HEX,ValCommand syntax AT$QCMIPMASPI =SPI,Val Set MN-HA Shared Secrets $QCMIPMHSSX Set Primary HA IP Address $QCMIPPHA Command syntax AT$QCMIPMHSPI =SPI,ValCommand syntax AT$QCMIPPHA =IP,Val Set MN-HA Shared Secrets $QCMIPMHSPI Set Home HA IP Address $QCMIPHA Command syntax AT$QCMIPSHA =IP,ValCommand syntax AT$QCMIPHA =IP,Val Set Secondary HA IP Address $QCMIPSHA MS Error Result Code +CME Error error Final Result Codes Message Service Failure Result Code +CMS Error errorSpecific Error Result Codes Extended Error Report +CEER Call Processing Codes Parameters Storage Intermediate Result Codes Code Meaning Codes for SMS-STATUS-REPORT +CDS and +CMGR AT Commands for Amps Operation AT Commands Supported When SIM Card Removed Example with Incoming Calls Example 1 When the MS Has Already Been Powered OnExamples Where a Voice Call is Originated Example When the MS is powered on Example 2 Send a Short Message Example of a Call Waiting SituationExamples About Short Messages Example 1 Receive a Short Message AT+WSCL=6,4 Example 3 Read Short Messages Mr Message Reference Ind Message type indicatorStatus report MO delivery acknowledge message Roaming Indication +WROM Chapter Incoming Message Directly Displayed +CMT Chapter Enhanced Roaming Indication +WERI AT+WSOS +WSOS0 AT+COPS=0,0 Emergency Mode +WSOS Chapter Only if the message privacy value is 0 Normal Read message +CMGR Chapter 179 Encod,lengthCRLFdata for SMS-DELIVER and SMS-SUBMIT, may be Command syntax AT+CMGL=statList Message +CMGL Chapter Response syntax +CMGL index,stat,da/oa,lang No Acknowledge Send Message +CMGS ChapterReply Message reply option Cbn CR entered text ctrl-Z / ESC Write Message to Memory +CMGW Chapter Syntax +WVSS pref Service Programming Code +WSPC ChapterVerizon. System Selection +WVSS Programming Unsuccessful +WOT3 Initial Programming Required +WOT0Programming In Progress +WOT1 Programming Successful +WOT2 MSI Download Ok +WOTI SPL Unlocked +WOTSNAM Download Ok +WOTN MDM Download Ok +WOTM AT+WPLCK=? Command syntax AT+WPLCK=levelExcess SPC Failures +WLCK Position Determination Lock Level +WPLCK Response Syntax +CDS ind, mr, ra, tora, scts, dt, st Text mode AT+CSQ AT+CLCK=AO,9 Allow data calls Barr data calls Query statusUse any four digit value. e.g Syntax for Facility Lock 190 Channel No service 800 MHz 1900 MHz Trusted Domain +WTDMN Boot URL +WBURLPacket Zone Identifier +PZID Sprint. System Selection +WSSS Proxy Address +WDPXYWiota Connection Control +WIOTA Please Retry +WOAR Iota Error +WOAEPreparing Data Services +WOAP Command syntax +WSUM? AT+WRMM Reset MIN and MDN to factory defaults +WRMMCommand syntax +WRMM

Base Station IP Address +CBIP

Syntax:

Command syntax: AT+CBIP

AT+CBIP?

AT+CBIP?

ERROR