Chapter 4 – General Commands

Set Phone Functionality +CFUN

Description: This command selects the mobile station’s level of functionality. AT+CFUN=0 is equivalent to AT+CPOF

The AT+CFUN=1 (by default, AT+CFUN will act the same as AT+CFUN=1) command restarts the entire CDMA stack and CDMA functionality: a complete software reset is performed. In addition, the OK response will be sent at the last baud rate defined by the +IPR command.

Values:

<functionality level>

 

 

0: Set the phone to OFFLINE mode.

 

 

1: Set the phone to ONLINE mode and resets the stet.

 

Syntax:

Command syntax: AT+CFUN=<functionality level>

 

 

Command

Possible Responses

 

AT+CFUN?

+CFUN: 1

 

Note: Ask for current functionality level

OK

 

 

Note: Full functionality

 

AT+CFUN=0

OK

 

Note: Set phone offline

Note: Command valid

 

AT+CFUN=1

OK

 

Note: Set phone ONLINE. A software reset is performed.

Note: Command valid

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C

29

Page 28 Page 30
Page 29
Image 29
Multi-Tech Systems CDMA Wireless Modem manual Set Phone Functionality +CFUN, Values Functionality level, At+Cfun?
Page 28 Page 30
Top Page Image Contents