Multi-Tech Systems CDMA Wireless Modem Service Option Management +WSOM, Commit Changes +WCMT

Chapter 16 – Provisioning AT Commands

Service Option Management +WSOM

Description: This command is used to manage Service Options for EVRC. It will allow the user to enable EVRC, set home page, home origination, and roam origination voice service options for the current NAM. It is only available for software builds, which include EVRC Service Option Management feature.

Values: <enable>

0: disable EVRC

1: enable EVRC

<home page SO> 0: IS96A

1: EVRC

2: 13k

3: IS96

4: WILDCARD

<home orig SO> & <roam orig SO> 0: IS96A

1: EVRC

2: 13k

3: IS96

Syntax: Command syntax: AT+WSOM=<enable>,<home page SO>,<home orig SO>,<roam orig SO>

Command	Possible Responses
AT+WSOM?	+WSOM: 0, 1, 2, 0
Note: Get the Service	OK
Options of the current NAM	Note: EVRC disabled, home page is set to EVRC, home orig is set to
	13k, roam orig is set to IS96A
AT+WSOM=1,4,2,2	OK
Note: Set current NAM	Note: EVRC enabled, set home page to WILDCARD, set home orig to
Service Options	13k, set roam orig to 13k

Commit Changes +WCMT

Description: This command is used to commit or to undo/revert any changes done during the service programming session. Changes performed during this session will not take place until a commit command has been sent (AT+WCMT=1). Commission of these changes will force a software reset of the modem. Sending this command indicates this service provisioning session is complete. In order to perform any subsequent provisioning, the service programming code must be entered using the +WSPC command.

Values:	<val>
	0: undo changes
	1: commit changes
Syntax:	Command syntax: AT+WCMT=<val>
	Command	Possible Responses
	AT+WCMT=0	OK
	Note: Undo any changes performed during this provisioning AT
	session
	AT+WCMT=1	OK
	Note: Commit all changes performed during this provisioning AT	Note: software reset is performed
	session to non-volatile memory.

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 128