Multi-Tech Systems CDMA Wireless Modem Position Determination Operating Mode +WPDOM, Duration

		Chapter 13 – Position Determination (GPS) AT Commands
Position Determination Operating Mode +WPDOM
Description:	This command sets and returns the PD session operating mode.
Values:	<mode>
	0: Standalone only (currently not available)
	1: Network only
	2: Speed optimal (minimize time-to-fix, MS-based first, PDE-based later if failed)
	3: Accuracy optimal (PDE preferred, MS in case of failure)
	4: Data optimal– minimize data exchanged
	5: MS-based only
Syntax:	Command syntax: AT+WPDOM=<mode>
	Command	Possible Responses
	AT+WPDOM?	+WPDOM: 5
	Note: Request current setting mode	OK
	AT+WPDOM=1	OK
	AT+WPDOM=0	+CME ERROR: tbd (PD parameter not supported)

Position Determination Data Download +WPDDD

Description: This command specifies and returns the PD data download setting.

	Note: The default for +WPDDD is zeros. User must set the appropriate parameters prior to
	starting a gpsOne session.
Values:	<type>
	0: single-shot download of data valid for the specified duration periodically download
	data for the specified duration
	<duration>
	Specified in terms of minutes; type is declared as a word.
	Note: The download duration is not currently used in the gpsOne software.
Syntax:	Command syntax: AT+WPDDD=<type>,<duration>
	Command	Possible Responses
	AT+WPDDD?	+WPDDD: 0,10
	Note: Request current setting type	OK
	AT+WPDDD=0,10	OK
	Note: single-shot data valid for 10 minutes

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 88