Multi-Tech Systems CDMA Wireless Modem manual Request Revision Identification +CGMR

Chapter 4 – General Commands

CHAPTER 4 - GENERAL COMMANDS

Request Revision Identification +CGMR

Description:	This command is used to display the operating software version.
Syntax:	Command syntax: AT+CGMR
	Command	Possible Responses
	AT+CGMR	+CGMR: S/W VER: WISMOQ WQ1.1 Mar 20 2002 17:30:00
		OK
	Note: Get software version	Note: Software Version WISMOQ, revision WQ1.1 generated
		on the March 20th, 2002 at 17:30:00

Electronic Serial Number +CGSN

Description: This command allows the user application to get the ESN of the product. The ESN value is displayed in hexadecimal format.

Syntax:	Command syntax: AT+CGSN
	Command	Possible Responses
	AT+CGSN	+CGSN: FE7A7704
		OK
	Note: Get the ESN	Note: ESN read from NV

Select TE Character Set +CSCS

Description: This command informs the MS which character set is in use by the TE. The MS uses this information to convert each character of entered or displayed text data. The character set is used for send, read or write of short messages.

Values:	<Character Set>
	“CDMA” CDMA default (ASCII) character set.
	“CUST” Custom character set.
Syntax:	Command syntax: AT+CSCS=<Character Set>
	Command	Possible Responses
	AT+CSCS=”CDMA”	OK
	Note: CDMA default alphabet	Note: Command valid
	AT+CSCS?	+CSCS: “CDMA”
	Note: Custom character set	OK
		Note: Command valid
	AT+CSCS=?	+CSCS: ("CDMA","CUST")
		OK
	Note: Get possible values	Note: Possible values

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 27