Chapter 9 – Supplementary Service Commands

CHAPTER 9 - SUPPLEMENTARY SERVICES COMMANDS

Supplementary Service commands are specialized call processing commands used to control carrier features on the modem such as caller ID, call forwarding, call waiting, 3-way calls, and specialized CDMA test calls.

Call Forwarding +CCFC

Description: This command allows control of the call forwarding supplementary service, if supported by the carrier. All calls will be forwarded unconditionally to the phone number specified. The modem will make a brief call to the CDMA network using an ATD specified prefix number (country and carrier specific) to setup or cancel call forwarding. An audio tone will be produced in the audio path to confirm the change of the call forwarding state.

Values:

<number>: The phone number to forward all calls to.

 

Note 1: Country and carrier specific call forwarding services (e.g. *68, *72, etc.) may also be

 

available to the host application in addition to the modem provided +CCFC functionality. The

 

host application can utilize these enhanced services for call forwarding with the modem ATD

 

command (e.g. ATD*72).

 

 

Note 2: If the “FD” facility is enabled, only the entries in the FDN phonebook can be

 

forwarded.

 

Syntax:

Command syntax: AT+CCFC= <number>

 

Command

Possible Responses

 

ATD*72

OK

 

Note: Specify the call forwarding

Note: Prefix number set.

 

prefix number.

 

 

AT+CCFC=8585551212

OK

 

Note: Register to an unconditional call

+WORG:*728585551212

 

forwarding.

+WCNT:3

 

 

Note: Call forwarding active for all incoming calls to phone number

 

 

858-555-1212

 

AT+CCFC=0

OK

 

Note: Cancel unconditional call

+WORG:*720

 

forwarding

+WCNT:3

 

 

Note: Call forwarding cancelled.

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C

68

Page 68
Image 68
Multi-Tech Systems CDMA Wireless Modem Call Forwarding +CCFC, Number The phone number to forward all calls to, AT+CCFC=0