Multi-Tech Systems CDMA Wireless Modem specification

Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation

Reset RLP Protocol Statistics $QCRLPR

Description: This command is used to zero all the RLP statistics counters. This does not apply to RLP 3 statistics (see $QCRL3R).

Syntax:	Command syntax: AT$QCRLPR
	Command	Possible Responses
	AT$QCRLPR?	ERROR
	Note: Display the current setting	Note: Command is not valid
	AT$QCRLPR	$QCRLPR:
	Note: Reset RLP statistics counter	OK
		Note: Command is valid

Dump PPP Protocol Statistics $QCPPPD

Description: This command is used to dump the PPP statistics in ASCII format to the DTE.

Syntax:	Command syntax: AT$QCPPPD
	Command	Possible Responses
	AT$QCPPPD?	ERROR
	Note: Display the current setting	Note: Command is not valid
	AT$QCPPPD	$QCPPPD:
	Note: Dump PPP statistics information	In LCP :0000 Out LCP :0000
		….
		OK
		Note: Command is valid

Reset PPP Protocol Statistics $QCPPPR

Description:	This command is used to zero all of the PPP statistics counters.
Syntax:	Command syntax: AT$QCPPPR
	Command	Possible Responses
	AT$QCPPPR?	ERROR
	Note: Display the current setting	Note: Command is not valid
	AT$QCPPPR	$QCPPPR:
	Note: Reset PPP statistics counter	OK
		Note: Command is valid

Dump IP Protocol Statistics $QCIPD

Description: This command is used to dump the IP statistics in ASCII format to the DTE.

Syntax:	Command syntax: AT$QCIPD
	Command	Possible responses
	AT$QCIPD?	ERROR
	Note: Display the current setting	Note: Command is not valid
	AT$QCIPD	$QCIPD:
	Note: Dump IP statistics information	IP:
		InReceives :0000 InHdrErrors :0000
		….
		OK
		Note: Command is valid

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C

152

Image 152

Multi-Tech Systems CDMA Wireless Modem manual Reset RLP Protocol Statistics $QCRLPR, Dump PPP Protocol Statistics $QCPPPD

Contents

AT Commands For Cdma Wireless Modems Reference Guide AT Commands for Cdma Wireless Modems Revision Level Date DescriptionMulti-Tech logo is a trademark of Multi-Tech Systems, Inc Country By Email By Phone Contents Call Control Commands Supplementary Services Commands Position Determination GPS AT Commands Provisioning AT Commands 124 Reference Information 166 AT Command Examples 171 Table of Contents Scope of This Document Related References Definitions Power from the base stations the mobile sees Format message is supportedCdma revision of the mobile or base station PRL is loaded into the phone and is saved in NV-RAM Information Responses and Result Codes Line SettingsCommand Line Cell Environment Description Indication +CCED Cell Broadcast Message Directly Displayed +CBMCell Broadcast Message Stored in Memory +CBMI Call Waiting Indication +CCWA SMS Status Report Indication Directly Displayed +CDSSMS Status Report Indication Stored in Memory +CDSI Values Callerid Key Press or Release +CKEV Caller ID Presentation +CLIPIncoming Message Directly Displayed +CMT Type Mode Preference +COPS Incoming Message Stored in Memory +CMTIRegistration & Roaming +CREG Values stat Incoming Call +RING Incoming Call +CRINGRxLev Indication +CSQ Call Answered +WANS Call Connected +WCNTCall Ended +WEND Values Call type Feature Notification Message +WFNM Flash Indication +WFSHResponse syntax +WEND reason ATH General Indicator +WIND Command syntax AT+WIND=IndLevel Call Originated +WORGCall Privacy Indication +WPRV Prv Emergency Mode +WSOS Roaming Indication +WROMRoam Flag SMS Message Storage Full +WMGF Voice Mail Indicator +WVMICurrent NAM Change +WNAM Power Save +WSPS Leaving power save Entering power saveResponse Syntax +WSPS state State Request Revision Identification +CGMR Electronic Serial Number +CGSNSelect TE Character Set +CSCS Values Character Set Repeat Last Command a Request Imsi +CIMICapabilities List +GCAP Phone Offline +CPOF Command syntax AT+CFUN=functionality level Set Phone Functionality +CFUNValues Functionality level AT+CFUN? Report Mobile Equipment Errors +CMEE Command syntax AT+CMEE=error reporting flagPhone Activity Status +CPAS Keypad Control +CKPD Command syntax AT+CCLK=date and time string Command syntax AT+CRMP=call type,volume,type,indexClock Management +CCLK Ring Melody Playback +CRMP Ringer Sound Level +CRSL Subscriber Number +CNUMSelect Type of Address +CSTA Values Sound level View Modem Timers +WTMR Command syntax AT+WMSNModem Serial Number +WMSN AT+WTMR Direct Dial Syntax Dial Command DCommand syntax ATDnb Hang-Up Command H Command syntax ATDindex ATDmemname ATDmemindexCommand syntax ATH Phonebook Syntax Extended Error Report +CEER Command syntax ATACommand syntax AT+CEER Answer a Call a Dtmf Signals +VTD, +VTS Dtmf Start and Stop Continuous +WSDT, +WSDS Automatic Answer S0 Redial Last Telephone Number DLAutomatic Dialing with DTR %Dn Values Mode Command syntax AT+CICB=modeCommand syntax AT+CSNS Incoming Call Bearer +CICB Volume Gain Control +VGR Microphone Gain +VGT Values ActiveSpkMic Microphone Mute Control +CMUTSpeaker & Microphone Selection +SPEAKER Echo Cancellation +ECHO Side Tone Modification +SIDETValues Val1 Val2 TTY Mode +WTTY Initialize Voice Parameters +VIPAT+VIP AT+WTTY Signal Quality +CSQ Valid value ranges Represents an unknown signal qualityAutomatic Cdma Only Cdma or Amps only Analog only AT+CSQ Band Preference +WBND Band Home Networks only, as defined in the PRL default value Command syntax AT+WRMP=modeRoam Preference +WRMP Roaming on Affiliated networks, as defined in the PRL Network Registration & Roaming +CREG Stat Values Nam Change NAM Selection +WNAMRead Current NAM +WCNM Command syntax AT+WSOS=flag AT+WSOS=1 ErrorAT+WSOS? AT+WSOS=? Suppress output of ERI indicators 64 through Enable output of ERI indicators 64 throughCommand syntax AT+WRMW=value Extended Roam Indication +WRMW SIM Card Operational Commands Enter PIN +CPIN PIN Remaining Attempt Number +CPINC Command syntax AT+CPINC Response syntax +CPINC n1,n2,k1,k2Enter PIN2 +CPIN2 Facility Lock +CLCK PasswdAT+CLCK? AT+CLCK=AO,2 Change Password +CPWD Card Identification +CCIDOldpwd Newpwd Parameters Definition Select Message Service +CSMS New Message Acknowledgement +CNMA Show Text Mode Parameters +CSDH Preferred Message Storage +CPMS New Message Indication +CNMI Bfr Read Message +CMGR Oa/da AT+CMSS=3 AT+CMGR=2 +CMS Error AT+CPMS=SR+CNMI=,,,2AT+CMGR=1 Encoding Length Length of the text message in bytes List Message +CMGLIndex Place of storage in memory Cbn Call Back Number Send Message +CMGSDa Destination address value in string format Write Message to Memory +CMGW Send Message From Storage +CMSS Command syntax AT+CMGD=Index ,DelFlag Delete Message +CMGDValues index DelFlag Command syntax AT+CSCB=mode Select Broadcast Messages +CSCBMessage Status Modification +WMSC Message Message Overwriting +WMGO Change SMS Status +WUSS Set SMS Compose Language and Encoding +WSCL Set Timestamp of MT SMS +WSTMValues Lang Enc Command e.g. ATD*72 Forwarded Command syntax AT+CCFC= numberCall Forwarding +CCFC Number The phone number to forward all calls to Calling Line Identification Restriction +CLIR Calling Line Identification Presentation +CLIP Send Flash to Base Station +WFSH AT+WFSH List Current Call State +CLCC Using AT Commands During a Data Connection Select Mode +FCLASSSwitch From Online to Offline Mode Switch From Offline to Online Mode Command syntax AT+CRC Disables reporting of local port rateCommand syntax AT+ILRR=value Cellular Result Codes +CRC AT+DS? Command syntax AT+DS=dir,neg,P1,P2V42 Bis Data Compression +DS This syntax is for setting the +DR reporting method Disable reporting Enable reportingCommand syntax AT+DR=val V42 Bis Data Compression Report +DR Command syntax AT+ICF= format, parity Fixed DTE Rate +IPRDTE-DCE Character Framing +ICF Values Format Set DCD Signal &C DTE-DCE Local Flow Control +IFC Set DTR Signal &D Set DSR Signal &SBack to Online Mode O Result Code Suppression Q DCE Response Format Auto-Tests &TEcho E Values Num AT&V Display Configuration &VCommand syntax AT&V Restore Factory Setting &F Save Configuration &WCommand syntax ATInum Request Identification Information Command syntax AT+CPBS=bk Select Phonebook Memory Storage +CPBSAT+CPBS=? AT+CPBS=EN AT+CPBS? Command syntax AT+CPBU? Command syntax AT+CPBF=stringReturn Selected Phonebook Locations +CPBU Find Phonebook Entries +CPBF Write Phonebook Entry +CPBW String+CME Erro AT+CPIN2? Ruim PIN2 Command syntax AT+CPBR=first,last Command syntax AT+CPBP= phone numberPhonebook Read +CPBR Phonebook Search +CPBP Values Call phonebook Avoid Phonebook Init +WAIPDelete Calls From Phonebook +WDCP This command sets and returns the PD session type Command syntax AT+WPDST=typePosition Determination Session Type +WPDST Session to provide the last position info available Duration Position Determination Operating Mode +WPDOMPosition Determination Data Download +WPDDD Position Determination Privacy Level +WPDPL Position Determination NV Privacy Level +WPPRVTime Values Level Position Determination Transport Setting +WPTLM Values SettingCommand syntax AT+WPTLM=setting DBM Data Burse Message Values Service Position Determination Start Session +WPDSSPosition Determination End Session +WPDES Performance AT+WPDSS=PV Position Determination Start Session Result +WPDSSAT+WPDSS=P Set IP Address of gpsOne Session +WPDIP Set Port of gpsOne Session +WPDPTValues Ipaddress Values Port Manufacturer Identification +WGMI Request Model Identification +WGMMCell Environment and RxLev Indication +CCED Requested dump Command syntax AT+CCED=mode, requested dump Analog Digital Converters Measurements +ADC Mobile Equipment Event Reporting +CMER Read Gpio Value +WIOR Write Gpio Value +WIOWGpio to read Value AT+WTONE=0 AT+WTONE=? Play Tone +WTONEAT+WTONE? Mode=1 Play Dtmf Tone +WDTMFHardware Version +WHWV Values Path Select Voice Gain +WSVGStatus Request +WSTR Ring Indicator Mode +WRIM 32kHz Sleep Mode +W32K Change Default Melody +WCDM DefaultSoftware Version +WSSW Values Melody Command syntax AT+WCCS=mode,table,char 1,char Custom Character Set +WCCS Cphs Command +CPHS Change Default Player +WCDPFctId Status Reset +WRST Set Standard Tone +WSST Normal default Private Command syntax AT+WPRV=voice privacy levelSet Voice Privacy Level +WPRV Values Voice privacy level Command syntax AT+WPIN=mode,current val,new val AT+CSQ? +CME ErrorSecurity PIN +WPIN Current val & new val Interval Request PRL Version Information +WPRLMinute Alert +WMBP Configure LED Indicator +CLED Values Bitmap valueBit Bit 2 bit7 Reserved Syntax Command syntax AT+WPAD=mode Keypad Enable/Disable +WPADKeypad disabled Keypad enabled Overview of SIM Application ToolKit SummaryFunctionality Profile Download Messages Exchanged During a SIM ToolKit Operation Data Download to SIMMenu Selection Call control by SIM 113 Config TimeoutSIM ToolKit Set Facilities +STSF Autoresponse Unsolicited Result Error CodesSIM ToolKit Indication +STIN AT+STIN? +CME Error Last SIM Toolkit IndicationAT+STIN? AT+STGI=0 Command syntax +STGI=Cmd SIM ToolKit Get Information +STGI+STGI=? +STGI Alpha Identifier menu Idx 1NbItems 1 Alpha Idx Label DefaultItem 1 CalledNbSubAdress Class Values when Cmd=11 Setup Event List Error CodesUnsolicited Result SIM ToolKit Control Response +STCR Evt SIM ToolKit Give Response +STGR Values CmdType Values when CmdType=4 Setup call Possible Error CodesDetected Indication +STIN has not been received Command syntax +STGR=CmdType,Result,Data +STGR=? Service Programming Code +WSPC Mobile Directory Number +WMDNValues Lock type Code Set Imsi +WIMI SID and NID +WSIDSID number NID number Access Overload Class +WAOC Slot Cycle Index +WSCIPrimary Browser Gateway +WBGP Secondary Browser Gateway +WBGS Secondary Cdma Channels +WSCC Packet Dial String +WPDSPrimary Cdma Channels +WPCC Service Option Management +WSOM Values enableCommit Changes +WCMT Home page SO 0 IS96A Location in SID/NID list to read Command syntax AT+WSNR=indexRead SID/NID Entries +WSNR AT+WSCI=1 AT+WCMT=0 Service Programming ExampleError AT+WPDS? Select Tone Dialing T Remote Async/Fax CommandReset to Default Configuration Z0 Command syntax ATP Command syntax ATSn=valueSelect Pulse Dialing P Basic S-Registers SX Error Control Operation +EB DefaultlengthNumeric Parameter Control +EFCS Values Breakselection Error Control Report +ER Error Control Selection +ESValues Origrqst Origfbk Error Control Selection +ESR Error Control Selection +ETBMTimer Values PendingTD Request Revision Identification +GMR Request Manufacture Identification +GMIRequest Manufacture Identification +GMM Modulation Selection +MS Request Product Serial Number Identification +GSNRequest Global Object Identification +GOI Reporting Control +MV18R Modulation Automode Control +MAModulation Reporting Control +MR Fbktimeenable Selection +MV18SCellular Extension +CXT Dfltansmode Um Interface Data Compression Reporting +CDR Configuration String +CFGQuery Service +CAD Command syntax AT+CDS=Val Command syntax AT+CRM=ValUm Interface Data Compression +CDS Set Rm Interface Protocol +CRM Battery Charge +CBC Command State Inactivity Timer +CQDCommand syntax AT+CQD=val Command syntax AT+CMIP Command syntax AT+CBIP AT+CBIP? ErrorBase Station IP Address +CBIP AT+CBIP? PA PF PCS Serving System +CSSValues Class Command syntax AT+CMUX=n Command syntax AT+CFC=ValSelect Multiplex Option +CMUX Um Interface Fax Compression +CFC Hang-up Voice +CHV Dial Command for Voice Calls +CDVIWF Content List +CGCAP Um Packet Data Inactivity Timer +CTA Command syntax AT+CGOICommand syntax AT+CTA=val IWF Device Identification +CGOI IS-707.3 Fax Parameters IS-707.3 Fax Action Commands Transition to Diagnostics Monitor $QCDMG Command syntax AT$QCDMGCommand syntax AT$QCQNC=Val Quick Net Connect $QCQNC Protocol Revision in Use $QCPREV Originate M-to-M Packet Data Call $QCMTOMDump RLP Protocol Statistics $QCRLPD Values Number Reset RLP Protocol Statistics $QCRLPR Reset PPP Protocol Statistics $QCPPPRDump PPP Protocol Statistics $QCPPPD Dump IP Protocol Statistics $QCIPD Reset IP Protocol Statistics $QCIPR Reset UDP Protocol Statistics $QCUDPRDump UDP Protocol Statistics $QCUDPD Dump TCP Protocol Statistics $QCTCPD Clear Mobile Error Log $QCCLR Reset TCP Protocol Statistics $QCTCPRSet Data Service Option $QCSO Automatic Packet Detection $QCPKND Pre-arrangement Setting $QCVADAnswer Incoming Voice Call $QCCAV Command syntax AT$QCMDR=Val Command syntax AT$QCRL3DSet DM Baud Rate $QCDMR Set Medium Data Rate $QCMDR SCH Selection $QCTRTL Reset RLP 3 Protocol Statistics $QCRL3RSCRM’ing Selection $QCSCRM Command syntax AT$QCMIP=Val SCH Selection $QCMIPAT$QCMIP? AT$QCMIP=? AT$QCMIP=0 Current Active Profile $QCMIPEP MIP Selection $QCMIPPRFC2002bis Selection $QCMIPT Command syntax AT$QCMIPGETP=Val String The network access identifier text to be storedCommand syntax AT$QCMIPNAI=String,Val Return Profile Information $QCMIPGETP Set Reverse Tunneling $QCMIPRT Set MN-AAA Shared Secrets $QCMIPMASS Set MN-HA Shared Secrets $QCMIPMHSS Set MN-AAA Shared Secrets $QCMIPMASSX Command syntax AT$QCMIPMHSSX =HEX,Val Command syntax AT$QCMIPMASPI =SPI,ValSet MN-HA Shared Secrets $QCMIPMHSSX Set MN-AAA Shared Secrets $QCMIPMASPI Command syntax AT$QCMIPMHSPI =SPI,Val Command syntax AT$QCMIPPHA =IP,ValSet MN-HA Shared Secrets $QCMIPMHSPI Set Primary HA IP Address $QCMIPPHA Command syntax AT$QCMIPSHA =IP,Val Command syntax AT$QCMIPHA =IP,ValSet Secondary HA IP Address $QCMIPSHA Set Home HA IP Address $QCMIPHA MS Error Result Code +CME Error error Message Service Failure Result Code +CMS Error error Specific Error Result CodesExtended Error Report +CEER Call Processing Codes Final Result Codes Intermediate Result Codes Parameters Storage Codes for SMS-STATUS-REPORT +CDS and +CMGR Code Meaning AT Commands Supported When SIM Card Removed AT Commands for Amps Operation Example 1 When the MS Has Already Been Powered On Examples Where a Voice Call is OriginatedExample When the MS is powered on Example with Incoming Calls Example of a Call Waiting Situation Examples About Short MessagesExample 1 Receive a Short Message Example 2 Send a Short Message Example 3 Read Short Messages AT+WSCL=6,4 Ind Message type indicator Status reportMO delivery acknowledge message Mr Message Reference Incoming Message Directly Displayed +CMT Chapter Roaming Indication +WROM Chapter Enhanced Roaming Indication +WERI Emergency Mode +WSOS Chapter AT+WSOS +WSOS0 AT+COPS=0,0 Read message +CMGR Chapter Only if the message privacy value is 0 Normal 179 Command syntax AT+CMGL=stat List Message +CMGL ChapterResponse syntax +CMGL index,stat,da/oa,lang Encod,lengthCRLFdata for SMS-DELIVER and SMS-SUBMIT, may be No Acknowledge Send Message +CMGS ChapterReply Message reply option Write Message to Memory +CMGW Chapter Cbn CR entered text ctrl-Z / ESC Syntax +WVSS pref Service Programming Code +WSPC ChapterVerizon. System Selection +WVSS Initial Programming Required +WOT0 Programming In Progress +WOT1Programming Successful +WOT2 Programming Unsuccessful +WOT3 SPL Unlocked +WOTS NAM Download Ok +WOTNMDM Download Ok +WOTM MSI Download Ok +WOTI Command syntax AT+WPLCK=level Excess SPC Failures +WLCKPosition Determination Lock Level +WPLCK AT+WPLCK=? +CDS ind, mr, ra, tora, scts, dt, st Text mode Response Syntax AT+CSQ Allow data calls Barr data calls Query status Use any four digit value. e.gSyntax for Facility Lock AT+CLCK=AO,9 190 No service 800 MHz 1900 MHz Channel Trusted Domain +WTDMN Boot URL +WBURLPacket Zone Identifier +PZID Sprint. System Selection +WSSS Proxy Address +WDPXYWiota Connection Control +WIOTA Iota Error +WOAE Preparing Data Services +WOAPCommand syntax +WSUM? Please Retry +WOAR AT+WRMM Reset MIN and MDN to factory defaults +WRMMCommand syntax +WRMM