Multi-Tech Systems CDMA Wireless Modem manual SIM ToolKit Get Information +STGI, +Stgi=?

Chapter 15 – SIM TOOLKIT

SIM ToolKit Get Information +STGI)

Description: This command allows you to get the information (text to display, Menu information, priorities.) of a pro-active command sent from the SIM. The information is returned only after receiving a SIM Toolkit indication (+STIN).

Syntax:	Command syntax: +STGI=<Cmd>
	Command		Possible Responses
	+STGI=<Cmd>		See following table.
			+CME ERROR: <err>
	+STGI=?		+STGI: (0-11)
	Note: Display valid parameter range.		OK
	Cmd	Description	Possible Responses
	0	Get information about	+STGI: <Alpha Identifier menu>
		‘Setup Menu’ pro-active command.	+STGI: <Id1>,<NbItems>,<Alpha Id1 Label>,<Help
			Info>[,<NextActionId>]<CR><LF>
			+STGI: <Id2>,<NbItems>,<Alpha Id2 Label>,<Help
			Info>[,<NextActionId>]<CR><LF>
			[.]]
			No action expected from SIM.
	1	Get information about	+STGI: <Prior>,<Text>,<ClearMode>
		‘Display text’ pro-active command.	No action expected from SIM.
	2	Get information about ‘Get Inkey’	+STGI: <Format>,<HelpInfo>[,<TextInfo>]
		pro-active command.	SIM expects key pressed (+STGR).
	3	Get information about ‘Get	+STGI: <Format>,<EchoMode>,<SizeMin>,<SizeMax
		Input’ pro-active command.	<HelpInfo>[,<TextInfo>]
			SIM expects key input (+STGR).
	4	Get information about	+STGI: <Type>,<CalledNb>,<SubAddress>,<Class>
		‘Setup call’ pro-active command.	SIM expects user authorization (+STGR).
	5	Get information about ‘Play	+STGI:
		Tone’ pro-active command.	<ToneType>[,<TimeUnit>,<TimeInterval>,<TextInfo>]
			No action.
	6	Get information about ‘Sel	+STGI: <DefaultItem>, <Alpha Identifier
		Item’ pro-active command.	menu><CR><LF>
			+STGI: <Id1>,<NbItems>,<Alpha Id1 Label>,<Help
			Info>[,<NextActionId>]<CR><LF>
			+STGI: <Id2>,<NbItems>,<Alpha Id2 Label>,<Help
			Info>[,<NextActionId>]<CR><LF>
			[.]]
			SIM expects an item choice (+STGR).
	7	Get information about	+STGI: <RefreshType>
		‘Refresh’ pro-active command.	No action (Refresh done automatically by product).
	8	Get information about ‘Send SS’ pro-	Currently not supported
		active command.
	9	Get information about ‘Send SMS’	+STGI: <TextInfo>
		pro-active command.	No action (Send SMS done automatically by product).
	10	Get information about ‘Send	Currently not supported
		USSD’ pro-active command
	11	Get information about	+STGI: <Evt>
		‘SETUP EVENT LIST’ pro-
		active command.

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 117